Click here

FUEL SENDER GAUGE ASSEMBLY INSPECTION

Click here
Click here Click here
  1. Click here

    INSPECT FUEL SENDER GAUGE ASSEMBLY


    1. A019M9ZE01

      Remove the fuel sender gauge assembly.

    2. Check the operation of the float moving smoothly between F and E.

    3. Measure the resistance between terminals 1 (FE) and 2 (FS) of the connector according to the value(s) in the table below.

      Standard Resistance
      Float Level Resistance (Ω)
      F 13.5 to 16.5
      E 405.5 to 414.5
      Tip:

      If the value is not as specified, replace the fuel sender gauge assembly.