REAR CRANKSHAFT OIL SEAL REMOVAL


  1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY

    Tech Tips

    See the steps from "Remove Engine Assembly with Transaxle" through "Remove Automatic Transaxle Assembly" Click here.

  2. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY


    1. A019OAPE01

      Using SST, hold the crankshaft pulley.

      SST
      09213-70011   ( 09213-70020 )
      09330-00021
    2. A019KZP

      Remove the 8 bolts, front drive plate spacer, drive plate and ring gear sub-assembly and rear drive plate spacer.

  3. REMOVE ENGINE REAR OIL SEAL


    1. A019NE2E04
      Text in Illustration
      *1 Protective Tape
      *2 Cut Position

      Using a knife, cut off the engine rear oil seal lip.

    2. Using a screwdriver, pry out the engine rear oil seal.

      Note

      Be careful not to damage the crankshaft.

      Tech Tips

      Tape the screwdriver tip before use.