FUEL PUMP REASSEMBLY


  1. INSTALL NO. 1 FUEL SUCTION SUPPORT


    1. A019P9CE03
      Text in Illustration
      *1 Fuel Filter

      Engage the 2 claws and install the No. 1 fuel suction support to the fuel filter.

  2. INSTALL FUEL PUMP ASSEMBLY WITH FILTER


    1. A019NRKE04
      Text in Illustration
      *1 O-ring
      *2 Spacer

      Apply gasoline to a new O-ring. Then install the O-ring and spacer to the fuel pump.

    2. A019O09

      Engage the 5 claws on the fuel filter and install the fuel pump assembly with filter.

      Note

      Attach the claws securely.

  3. INSTALL FUEL SUCTION PLATE SUB-ASSEMBLY


    1. A019N93E02
      Text in Illustration
      *1 Tube

      Connect the fuel pump harness connector.

      Note

      Do not separate the tube indicated in the illustration Click here.

    2. A019OOWE02
      Text in Illustration
      *1 Fuel Pump Filter Hose
      *a Cutout

      Install the fuel pump filter tube while aligning it to the installation position of the No. 1 fuel sub-tank.

    3. Connect the jet pump nozzle to the No. 1 fuel sub-tank.

    4. A019LWQE03
      Text in Illustration
      *1 Protrusion

      Make sure that the fuel tube passes under the protrusion of the fuel filter, and engage the claw of the No. 1 fuel suction support.

    5. Install the spring to the fuel suction plate shaft and install it to the No. 1 fuel sub-tank.

    6. A019LX6E03
      Text in Illustration
      *1 E-ring

      Install a new E-ring.

  4. INSTALL FUEL SENDER GAUGE ASSEMBLY


    1. A019L3KE02

      Slide the fuel sender gauge to fit the claw.