FUEL PUMP DISASSEMBLY


  1. REMOVE FUEL SENDER GAUGE ASSEMBLY


    1. A019L3KE01

      Disconnect the connector and remove the fuel sender gauge from the fuel suction tube.

  2. REMOVE FUEL SUCTION PLATE SUB-ASSEMBLY


    1. A019LX6E02
      Text in Illustration
      *1 E-ring

      Using needle nose pliers, remove the E-ring.

    2. A019M74E02
      Text in Illustration
      *1 Tube

      Disconnect the fuel pump connector from the fuel suction plate.

      Note


      • Do not do anything which may separate the fuel tube from either the fuel suction plate or fuel filter assembly, such as applying excessive force to the tube Click here.

      • Do not damage the wire harness.

    3. A019OUZ

      Disengage the 2 claws and remove the fuel filter from the No. 1 fuel sub-tank.

    4. A019KUN

      Using a screwdriver with its tip taped, disengage the claw of the jet pump nozzle.

    5. Separate the fuel pump filter hose.

    6. A019M8E

      Using a screwdriver with its tip taped, remove the fuel pump filter hose.

  3. REMOVE FUEL PUMP ASSEMBLY WITH FILTER


    1. A019O64E02
      Text in Illustration
      *1 Fuel Filter
      *2 Suction Filter

      Using a screwdriver with its tip wrapped in protective tape, disengage the 5 claws and remove the fuel pump assembly with filter from the fuel filter.

      Note


      • Do not damage the fuel filter.

      • Do not remove the suction filter.

      • Do not use either the fuel pump or the suction filter if the suction filter is removed from the fuel pump.

    2. A019LZJ

      Disconnect the fuel pump connector.

    3. A019MLHE06
      Text in Illustration
      *1 O-ring
      *2 Spacer
      *a 5.0 mm (0.197 in.)

      Remove the O-ring from the fuel pump. If the O-ring still remains in the fuel filter, remove it using a wire tip (1 mm diameter) that is formed as shown in the illustration.

      Note

      Be careful not to damage the sealing surfaces.

  4. REMOVE NO. 1 FUEL SUCTION SUPPORT


    1. A019NXEE02
      Text in Illustration
      *1 Fuel Filter

      Using a screwdriver with its tip taped, disengage the claw and remove the fuel No. 1 suction support.