FUEL SENDER GAUGE ASSEMBLY INSPECTION


  1. INSPECT FUEL SENDER GAUGE ASSEMBLY


    1. A019M9ZE02
      Text in Illustration
      *a Fuel Sender Gauge Assembly
      *b

      Front view of wire harness connector

      (to Fuel Sender Gauge Assembly)

      Remove the fuel sender gauge assembly.

    2. Check the operation of the float moving smoothly between F and E.

    3. Measure the resistance between terminals 1 (FE) and 2 (FS) of the connector according to the value(s) in the table below.

      Standard Resistance
      Float Level Resistance (Ω)
      F 13.5 to 16.5
      E 405.5 to 414.5

      Tech Tips

      If the value is not as specified, replace the fuel sender gauge assembly.