REAR CRANKSHAFT OIL SEAL REMOVAL


  1. REMOVE AUTOMATIC TRANSAXLE ASSEMBLY

    Click here

  2. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY

    Note


    • Using a height adjustable attachment and plate lift attachment, place the engine assembly with transaxle horizontally.

    • To prevent the oil pan from deforming, do not place any attachments onto the oil pan of the engine assembly.

    • Using an engine sling device and engine lift, secure the engine assembly before service.


    1. A019NX0E02

      Using SST, hold the crankshaft pulley.

      SST
      09213-54015
      09330-00021

      Tech Tips

      SST (Crankshaft pulley holding tool) Fixing bolt part No. : 91551-80650(2 pcs)

    2. A019KG1

      Remove the 8 bolts, front drive plate spacer, drive plate and ring gear sub-assembly, and rear drive plate spacer.

  3. REMOVE REAR ENGINE OIL SEAL


    1. A019JT1E04
      Text in Illustration
      *1 Cut Position

      Using a knife, cut off the lip of the oil seal.

    2. Using a screwdriver, pry out the oil seal.

      Tech Tips

      Tape the screwdriver tip before use.

      Note

      Do not damage the surface of the oil seal press fit hole or the crankshaft.