FRONT CRANKSHAFT OIL SEAL REMOVAL


  1. REMOVE FRONT WHEEL RH

  2. SEPARATE FRONT FENDER LINER RH

  3. REMOVE FRONT FENDER APRON SEAL RH


    1. A019O37

      Remove the 2 bolts, clip and front fender apron seal RH.

  4. REMOVE V-RIBBED BELT


    1. A019L02

      Attach a wrench to the hexagonal portion of the belt tensioner as shown in the illustration, rotate the belt tensioner clockwise, and remove the V-ribbed belt.

  5. REMOVE CRANKSHAFT PULLEY


    1. A019PA6E01

      Using SST, hold the crankshaft pulley and loosen the pulley bolt. Further loosen the bolt until 2 or 3 threads are screwed into the crankshaft.

      SST
      09213-54015
      09330-00021

      Tech Tips

      SST (Crankshaft pulley holding tool) Fixing bolt part No. : 91551-80650(2 pcs)

    2. A019OMQE02
      Text in Illustration
      *1 Crankshaft Pulley Bolt

      Using SST and the pulley bolt, remove the crankshaft pulley.

      SST
      09950-50013   ( 09951-05010, 09952-05010, 09953-05020, 09954-05011 )

      Tech Tips

      Apply a lubricant to the threads and end of SST.

  6. REMOVE TIMING CHAIN COVER OIL SEAL


    1. A019O31

      Using a screwdriver, pry out the oil seal.

      Tech Tips

      Tape the screwdriver tip before use.

      Note

      Do not damage the surface of the oil seal press fit hole or the crankshaft.