KNOCK SENSOR INSTALLATION


  1. INSTALL KNOCK CONTROL SENSOR


    1. A019JVJE03

      Install the 2 knock control sensors with the 2 bolts as shown in the illustration.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

      Note

      Make sure that each knock control sensor is in the correct position.

    2. Connect the 2 knock control sensor connectors.

  2. INSTALL INTAKE MANIFOLD


    1. Install the intake manifold Click here.

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.