KNOCK SENSOR REMOVAL


  1. PRECAUTION (w/ Air Suspension)

    Note

    Be sure to read Precaution thoroughly before servicing Click here.

  2. PRECAUTION (w/ Navigation System for HDD)

    Note

    After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait for the time specified in the following table before disconnecting the cable from the negative (-) battery terminal.

    Waiting Time before Disconnecting Cable from Negative (-) Battery Terminal
    Specification Waiting Time
    w/o Telematics transceiver 60 sec.
    w/ Telematics transceiver 120 sec.

  3. REMOVE INTAKE MANIFOLD


    1. Remove the intake manifold Click here.

  4. REMOVE KNOCK CONTROL SENSOR


    1. A019K6N

      Disconnect the 2 knock control sensor connectors.

    2. Remove the 2 bolts and 2 knock control sensors.