SFI SYSTEM BASIC INSPECTION

When the malfunction is not confirmed by the DTC check, troubleshooting should be carried out in all circuits considered to be possible causes of the problem. In many cases, by carrying out the basic engine check shown in the following flowchart, the location of the problem can be found quickly and efficiently. Therefore, using this check is essential when engine troubleshooting.


  1. CHECK BATTERY VOLTAGE

    Note

    Carry out this check with the engine stopped and the engine switch off.

    Result
    Result Proceed to
    11 V or more OK
    Below 11 V NG

    NG

    CHARGE OR REPLACE BATTERY
    OK

  2. CHECK WHETHER ENGINE CRANKS


    NG

    PROCEED TO PROBLEM SYMPTOMS TABLE Click here

    OK

  3. CHECK WHETHER ENGINE STARTS


    NG

    GO TO STEP 6
    OK

  4. CHECK AIR FILTER


    1. Visually check that the air filter is not excessively contaminated with dirt or oil.


      NG

      REPLACE AIR FILTER
      OK

  5. CHECK IDLE SPEED


    1. Check the engine idle speed Click here.


      NG

      TROUBLESHOOT IDLE SPEED AND PROCEED TO NEXT STEP
      OK

  6. CHECK FUEL PRESSURE


    1. Check the fuel pressure Click here.


      NG

      TROUBLESHOOT FUEL PRESSURE AND PROCEED TO NEXT STEP
      OK

  7. CHECK FOR SPARK


    1. Perform a spark test Click here.


      NG

      TROUBLESHOOT SPARK AND PROCEED TO NEXT STEP
      OK
      PROCEED TO PROBLEM SYMPTOMS TABLE Click here