MASS AIR FLOW METER REMOVAL


  1. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

    Click here

  2. REMOVE HOSE BRACKET (for LHD)


    1. A019P7C

      Remove the 2 nuts and separate the hose bracket from the outer cowl top panel sub-assembly.

  3. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY (for LHD)


    1. Place the front tires on the ground.

    2. A019O7N

      Disconnect the connector (w/ Windshield Deicer).

    3. Disengage the grommet and clamp, and separate the wire harness.

    4. A019OCLE03

      Remove the 6 nuts, 4 bolts and outer cowl top panel sub-assembly.

    5. Temporarily tighten the 4 nuts (A) to support the front shock absorber.

  4. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY (for RHD)


    1. Place the front tires on the ground.

    2. A019N0P

      Disconnect the connector (w/ Windshield Deicer).

    3. Disengage the grommet and clamp, and separate the wire harness.

    4. A019OF3E02

      Remove the 6 nuts, 4 bolts and outer cowl top panel sub-assembly.

    5. Temporarily tighten the 4 nuts (A) to support the front shock absorber.

  5. REMOVE MASS AIR FLOW METER SUB-ASSEMBLY


    1. A019KRM

      Disconnect the mass air flow meter connector.

    2. Remove the 2 screws and mass air flow meter.