ACCELERATOR PEDAL INSTALLATION


  1. INSTALL ACCELERATOR PEDAL ASSEMBLY


    1. Install the accelerator pedal assembly.

      Note


      • Avoid physical shock to the accelerator pedal assembly.

      • Do not disassemble the accelerator pedal assembly.

      • The accelerator pedal assembly does not require lubrication.

      • Do not apply oil or other lubricants to the accelerator pedal assembly. If applied, the accelerator pedal assembly must be replaced.


      1. Install the accelerator pedal assembly with the 2 nuts.

        Torque:
        4.9 N*m  { 50 kgf*cm, 43 in.*lbf }

      2. Connect the accelerator pedal assembly connector.

  2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)


    1. Engage each clamp.

    2. Connect each connector.

    3. A019OY6

      Engage the claw and 2 guides.

    4. Install the No. 1 instrument panel under cover sub- assembly with the 2 screws <D>.

  3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)


    1. Engage each clamp.

    2. Connect each connector.

    3. A019OCA

      Engage the claw and 2 guides.

    4. Install the No. 1 instrument panel under cover sub- assembly with the 2 screws <D>.