CAMSHAFT OIL CONTROL VALVE INSTALLATION


  1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY


    1. Camshaft timing oil control valve assembly (for exhaust side)


      1. A019N7SE06
        Text in Illustration
        *1 New O-ring

        Apply a light coat of engine oil to a new O-ring, and install it to the oil control valve.

      2. A019K7J

        Install the oil control valve with the bolt.

        Torque:
        10 N*m  { 102 kgf*cm, 7 ft.*lbf }

        Note


        • Do not allow foreign matter to contact the oil seal face of the oil control valve (connecting surface with the cylinder head cover).

        • Be careful that the O-ring is not cracked or moved out of place when installing the oil control valve.

      3. Connect the oil control valve connector.

    2. Camshaft timing oil control valve assembly (for intake side)


      1. A019N7SE06
        Text in Illustration
        *1 New O-ring

        Apply a light coat of engine oil to a new O-ring, and install it to the oil control valve.

      2. A019KDD

        Install the oil control valve with the bolt.

        Torque:
        10 N*m  { 102 kgf*cm, 7 ft.*lbf }

        Note


        • Do not allow foreign matter to contact the oil seal face of the oil control valve (connecting surface with cylinder head cover).

        • Be careful that the O-ring is not cracked or moved out of place when installing the oil control valve.

      3. Connect the oil control valve connector.

  2. INSTALL ENGINE WIRE


    1. Install the engine wire with the 2 nuts.

      Torque:
      8.4 N*m  { 86 kgf*cm, 74 in.*lbf }

  3. INSPECT FOR OIL LEAK

  4. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY


    1. A019KNK

      Fit the 3 retainers and install the No. 1 engine cover sub-assembly.

  5. INSTALL COOL AIR INTAKE DUCT SEAL


    1. Install the cool air intake duct seal with the 6 clips.

  6. INSTALL ENGINE ROOM SIDE COVER LH


    1. Engage the guide.

    2. Install the engine room side cover LH with the 4 clips.

  7. INSTALL ENGINE ROOM SIDE COVER


    1. Engage the guide.

    2. Install the engine room side cover with the 4 clips.