ACCELERATOR PEDAL REMOVAL


  1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)


    1. A019N4V

      Remove the 2 screws <D>.

    2. A019K8G

      Disengage the claw and 2 guides as shown in the illustration.

    3. Disconnect each connector.

    4. Disengage each clamp and remove the No. 1 instrument panel under cover sub-assembly.

  2. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)


    1. A019N9N

      Remove the 2 screws <D>.

    2. A019L8S

      Disengage the claw and 2 guides as shown in the illustration.

    3. Disconnect each connector.

    4. Disengage each clamp and remove the No. 1 instrument panel under cover sub-assembly.

  3. REMOVE ACCELERATOR PEDAL ASSEMBLY


    1. Remove the accelerator pedal assembly.

      Note


      • Avoid physical shock to the accelerator pedal assembly.

      • Do not disassemble the accelerator pedal assembly.

      • The accelerator pedal assembly does not require lubrication.

      • Do not apply oil or other lubricants to the accelerator pedal assembly. If applied, the accelerator pedal assembly must be replaced.


      1. A019K4YE01
        Text in Illustration
        *A for LHD:
        *B for RHD:

        Disconnect the accelerator pedal assembly connector.

      2. Remove the 2 nuts and accelerator pedal assembly.