ENGINE GENERAL MAINTENANCE

Tech Tips

Perform these procedures after the engine has cooled down.


  1. INSPECT DRIVE BELT

    Type See procedure
    2GR-FE

    Click here

    1AR-FE

    Click here

  2. REPLACE ENGINE OIL AND OIL FILTER

    Type See procedure
    2GR-FE

    Click here

    1AR-FE

    Click here

  3. REPLACE ENGINE COOLANT

    Type See procedure
    2GR-FE

    Click here

    1AR-FE

    Click here

  4. INSPECT SPARK PLUGS

    Type See procedure
    2GR-FE

    Click here

    1AR-FE

    Click here

  5. INSPECT BATTERY

    Type See procedure
    2GR-FE

    Click here

    1AR-FE

    Click here

  6. INSPECT AIR CLEANER FILTER ELEMENT


    1. Remove the air filter.

    2. A019LN4

      Check that the air cleaner is not excessively dirty.

      If the air cleaner is excessively dirty, replace the air cleaner filter element.

    3. If cleaning the air cleaner filter element, blow compressed air as shown in the illustration to clean it.

    4. Reinstall the air filter.

  7. INSPECT EXHAUST PIPES AND MOUNTINGS


    1. Visually check the pipes, hangers and connections for severe corrosion, leaks or damage.

  8. INSPECT FUEL TANK CAP GASKET

    Type See procedure
    2GR-FE

    Click here

    1AR-FE

    Click here

  9. INSPECT FUEL LINES, CONNECTIONS, FUEL TANK VAPOR VENT SYSTEM HOSES AND FUEL TANK BANDS


    1. Visually check the fuel lines and hoses for cracks, leaks, loose connections, or deformation.

    2. Check for tank band looseness or deformation.

  10. INSPECT CHARCOAL CANISTER

    Type See procedure
    2GR-FE

    Click here

    1AR-FE

    Click here