| Front axle hub bearing looseness | Maximum looseness: 0 mm (0 in.) |
| Front axle hub runout | Maximum runout: 0.05 mm (0.0020 in.) |
| Rear axle hub bearing looseness | Maximum looseness: 0 mm (0 in.) |
| Rear axle hub runout | Maximum runout: 0.08 mm (0.00314 in.) |
| Diaphragm oil seal installation depth | 0.7 to 1.3 mm (0.0276 to 0.0512 in.) | |
| Rear differential side gear shaft oil seal installation depth | 8.2 to 8.8 mm (0.323 to 0.346 in.) | |
| Electro magnetic control coupling sub-assembly vertical runout | Maximum runout: 0.06 mm (0.00236 in.) | |
| Electro magnetic control coupling sub-assembly lateral runout. | Maximum runout: 0.07 mm (0.00276 in.) | |
| Drive pinion to ring gear backlash | 0.13 to 0.25 mm (0.00512 to 0.00984 in.) | |
| Drive pinion preload (at starting) | New bearing | 1.8 to 3.0 N*m (19 to 30 kgf*cm, 17 to 26 in.*lbf) |
| Reused bearing | 1.5 to 2.5 N*m (16 to 25 kgf*cm, 14 to 22 in.*lbf) | |
| Total preload (at starting) | New bearing | 3.1 to 5.9 N*m (32 to 59 kgf*cm, 28 to 51 in.*lbf) |
| Reused bearing | 2.8 to 5.3 N*m (29 to 54 kgf*cm, 25 to 47 in.*lbf) | |
| Mark 75 | 1.74 to 1.76 mm (0.0685 to 0.0693 in.) |
| Mark 76 | 1.77 to 1.79 mm (0.0697 to 0.0705 in.) |
| Mark 77 | 1.80 to 1.82 mm (0.0709 to 0.0717 in.) |
| Mark 78 | 1.83 to 1.85 mm (0.0720 to 0.0728 in.) |
| Mark 79 | 1.86 to 1.88 mm (0.0732 to 0.0740 in.) |
| Mark 80 | 1.89 to 1.91 mm (0.0744 to 0.0752 in.) |
| Mark 81 | 1.92 to 1.94 mm (0.0756 to 0.0764 in.) |
| Mark 82 | 1.95 to 1.97 mm (0.0768 to 0.0776 in.) |
| Mark 83 | 1.98 to 2.00 mm (0.0780 to 0.0787 in.) |
| Mark 84 | 2.01 to 2.03 mm (0.0791 to 0.0799 in.) |
| Mark 85 | 2.04 to 2.06 mm (0.0803 to 0.0811 in.) |
| Mark 86 | 2.07 to 2.09 mm (0.0815 to 0.0823 in.) |
| Mark 88 | 2.10 to 2.12 mm (0.0827 to 0.0835 in.) |
| Mark 89 | 2.13 to 2.15 mm (0.0839 to 0.0846 in.) |
| Mark 90 | 2.16 to 2.18 mm (0.0850 to 0.0858 in.) |
| Mark 91 | 2.19 to 2.21 mm (0.0862 to 0.0870 in.) |
| Mark 92 | 2.22 to 2.24 mm (0.0874 to 0.0882 in.) |
| Mark 93 | 2.25 to 2.27 mm (0.0886 to 0.0894 in.) |
| Mark 94 | 2.28 to 2.30 mm (0.0898 to 0.0906 in.) |
| Mark 95 | 2.31 to 2.33 mm (0.0909 to 0.0917 in.) |
| Mark 96 | 2.34 to 2.36 mm (0.0921 to 0.0929 in.) |
| Mark 97 | 2.37 to 2.39 mm (0.0933 to 0.0941 in.) |
| Mark 98 | 2.40 to 2.42 mm (0.0945 to 0.0953 in.) |
| Mark 99 | 2.43 to 2.45 mm (0.0957 to 0.0965 in.) |
| Mark 00 | 2.46 to 2.48 mm (0.0969 to 0.0976 in.) |
| Mark 01 | 2.49 to 2.51 mm (0.0980 to 0.0988 in.) |
| Mark 02 | 2.52 to 2.54 mm (0.0992 to 0.1000 in.) |
| Mark 03 | 2.55 to 2.57 mm (0.1004 to 0.1012 in.) |
| Mark 04 | 2.58 to 2.60 mm (0.1016 to 0.1024 in.) |
| Mark 05 | 2.61 to 2.63 mm (0.1028 to 0.1035 in.) |
| Mark 06 | 2.64 to 2.66 mm (0.1039 to 0.1047 in.) |
| Mark 07 | 2.67 to 2.69 mm (0.1051 to 0.1059 in.) |
| Mark 08 | 2.70 to 2.72 mm (0.1063 to 0.1071 in.) |
| Mark 09 | 2.73 to 2.75 mm (0.1075 to 0.1083 in.) |
| Mark 10 | 2.76 to 2.78 mm (0.1087 to 0.1094 in.) |
| Mark 11 | 2.79 to 2.81 mm (0.1098 to 0.1106 in.) |
| Mark 12 | 2.82 to 2.84 mm (0.1110 to 0.1118 in.) |
| Mark 13 | 2.85 to 2.87 mm (0.1122 to 0.1130 in.) |
| Mark 14 | 2.88 to 2.90 mm (0.1134 to 0.1142 in.) |
| Mark 41 | 1.695 to 1.705 mm (0.0667 to 0.0671 in.) |
| Mark 42 | 1.705 to 1.715 mm (0.0671 to 0.0675 in.) |
| Mark 43 | 1.715 to 1.725 mm (0.0675 to 0.0679 in.) |
| Mark 44 | 1.725 to 1.735 mm (0.0679 to 0.0683 in.) |
| Mark 45 | 1.735 to 1.745 mm (0.0683 to 0.0687 in.) |
| Mark 46 | 1.745 to 1.755 mm (0.0687 to 0.0691 in.) |
| Mark 47 | 1.755 to 1.765 mm (0.0691 to 0.0695 in.) |
| Mark 48 | 1.765 to 1.775 mm (0.0695 to 0.0699 in.) |
| Mark 49 | 1.775 to 1.785 mm (0.0699 to 0.0703 in.) |
| Mark 50 | 1.785 to 1.795 mm (0.0703 to 0.0707 in.) |
| Mark 51 | 1.795 to 1.805 mm (0.0707 to 0.0711 in.) |
| Mark 52 | 1.805 to 1.815 mm (0.0711 to 0.0715 in.) |
| Mark 53 | 1.815 to 1.825 mm (0.0715 to 0.0719 in.) |
| Mark 54 | 1.825 to 1.835 mm (0.0719 to 0.0722 in.) |
| Mark 55 | 1.835 to 1.845 mm (0.0722 to 0.0726 in.) |
| Mark 56 | 1.845 to 1.855 mm (0.0726 to 0.0730 in.) |
| Mark 57 | 1.855 to 1.865 mm (0.0730 to 0.0734 in.) |
| Mark 58 | 1.865 to 1.875 mm (0.0734 to 0.0738 in.) |
| Mark 59 | 1.875 to 1.885 mm (0.0738 to 0.0742 in.) |
| Mark 60 | 1.885 to 1.895 mm (0.0742 to 0.0746 in.) |
| Mark 61 | 1.895 to 1.905 mm (0.0746 to 0.0750 in.) |
| Mark 62 | 1.905 to 1.915 mm (0.0750 to 0.0754 in.) |
| Mark 63 | 1.915 to 1.925 mm (0.0754 to 0.0758 in.) |
| Mark 64 | 1.925 to 1.935 mm (0.0758 to 0.0762 in.) |
| Mark 65 | 1.935 to 1.945 mm (0.0762 to 0.0766 in.) |
| Mark 70 | 1.945 to 1.955 mm (0.0766 to 0.0770 in.) |
| Mark 71 | 1.955 to 1.965 mm (0.0770 to 0.0774 in.) |
| Mark 72 | 1.965 to 1.975 mm (0.0774 to 0.0778 in.) |
| Mark 73 | 1.975 to 1.985 mm (0.0778 to 0.0781 in.) |
| Mark 74 | 1.985 to 1.995 mm (0.0781 to 0.0785 in.) |
| Mark 75 | 1.995 to 2.005 mm (0.0785 to 0.0789 in.) |
| Mark 76 | 2.005 to 2.015 mm (0.0789 to 0.0793 in.) |
| Mark 77 | 2.015 to 2.025 mm (0.0793 to 0.0797 in.) |
| Mark 78 | 2.025 to 2.035 mm (0.0797 to 0.0801 in.) |
| Mark 79 | 2.035 to 2.045 mm (0.0801 to 0.0805 in.) |
| Mark 80 | 2.045 to 2.055 mm (0.0805 to 0.0809 in.) |
| Mark 81 | 2.055 to 2.065 mm (0.0809 to 0.0813 in.) |
| Mark 82 | 2.065 to 2.075 mm (0.0813 to 0.0817 in.) |
| Mark 83 | 2.075 to 2.085 mm (0.0817 to 0.0821 in.) |
| Mark 84 | 2.085 to 2.095 mm (0.0821 to 0.0825 in.) |
| Mark 85 | 2.095 to 2.105 mm (0.0825 to 0.0829 in.) |
| Mark 86 | 2.105 to 2.115 mm (0.0829 to 0.0833 in.) |
| Mark 87 | 2.115 to 2.125 mm (0.0833 to 0.0837 in.) |
| Mark 88 | 2.125 to 2.135 mm (0.0837 to 0.0841 in.) |
| Mark 89 | 2.135 to 2.145 mm (0.0841 to 0.0844 in.) |
| Mark 90 | 2.145 to 2.155 mm (0.0844 to 0.0848 in.) |
| Mark 91 | 2.155 to 2.165 mm (0.0848 to 0.0852 in.) |
| Mark 92 | 2.165 to 2.175 mm (0.0852 to 0.0856 in.) |
| Mark 93 | 2.175 to 2.185 mm (0.0856 to 0.0860 in.) |
| Mark 94 | 2.185 to 2.195 mm (0.0860 to 0.0864 in.) |
| Mark 95 | 2.195 to 2.205 mm (0.0864 to 0.0868 in.) |
| Mark 96 | 2.205 to 2.215 mm (0.0868 to 0.0872 in.) |
| Mark 97 | 2.215 to 2.225 mm (0.0872 to 0.0876 in.) |
| Mark 98 | 2.225 to 2.235 mm (0.0876 to 0.0880 in.) |
| Mark 99 | 2.235 to 2.245 mm (0.0880 to 0.0884 in.) |
| Mark 00 | 2.245 to 2.255 mm (0.0884 to 0.0888 in.) |