FUEL LID OPENER SWITCH INSPECTION


  1. INSPECT FUEL LID OPENER SWITCH


    1. A019K98E01
      Text in Illustration
      *1

      Component without harness connected

      (Fuel Lid Opener Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      6 (B) - 7 (L) Fuel lid opener switch pushed Below 1 Ω
      6 (B) - 7 (L) Fuel lid opener switch not pushed 10 kΩ or higher

      If the result is not as specified, replace the fuel lid opener switch.

    2. Check that the switch illuminates.


      1. Apply battery voltage to the fuel lid opener switch and check that the switch illuminates.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → terminal 5

        Battery negative (-) → terminal 8

        		 Illuminates

        If the result is not as specified, replace the bulb.