POWER BACK DOOR DRIVE UNIT REMOVAL


  1. REMOVE ROOF HEADLINING ASSEMBLY

    Tech Tips

    Refer to the procedure up to Remove Roof Headlining Assembly Click here.

  2. REMOVE UPPER BACK WINDOW PANEL TRIM


    1. A019LJ0E01
      Text in Illustration
      *1 2-piece Type Clip

      Disengage the 7 clips and 6 claws, and remove the upper back window panel trim.

      Tech Tips

      If any clips remain on the back door panel after the upper back window panel trim is removed, remove the clips and install them to the upper back window panel trim.

  3. REMOVE REAR ROOF SIDE RAIL PAD LH


    1. A019OVX

      Disengage the 2 fasteners and remove the rear roof side rail pad LH.

  4. REMOVE POWER BACK DOOR UNIT ASSEMBLY


    1. A019NLM

      Remove the 2 bolts.

    2. A019KYGE01

      Disconnect the connector.

    3. Remove the 5 bolts.

    4. Disengage the claw and remove the power back door unit assembly as shown in the illustration.