RELAY ON-VEHICLE INSPECTION


  1. INSPECT RR DEF RELAY


    1. A019N09E02
      Text in Illustration
      *1

      Component without harness connected

      (RR DEF Relay)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 4 Battery voltage applied between terminals 1 and 2 10 kΩ or higher
      3 - 4 Battery voltage not applied between terminals Below 1 Ω
      3 - 5 Battery voltage applied between terminals 1 and 2 Below 1 Ω
      3 - 5 Battery voltage not applied between terminals 10 kΩ or higher

      If the result is not as specified, replace the RR DEF relay.

  2. INSPECT DEICER RELAY


    1. A019KTZE03
      Text in Illustration
      *1

      Component without harness connected

      (DEICER Relay)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage applied to terminals 1 and 2 Below 1 Ω
      3 - 5 Battery voltage not applied between terminals 10 kΩ or higher

      If the result is not as specified, replace the DEICER relay.