Click here

ROOF SUNSHADE SWITCH INSPECTION

Click here
Click here Click here
  1. Click here

    INSPECT ROOF SUNSHADE SWITCH (MAP LIGHT ASSEMBLY)


    1. A019OS2E01

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      T10-38 (CLS) - T10-40 (GND) CLOSE switch is pressed Below 1 Ω
      T10-38 (CLS) - T10-40 (GND) CLOSE switch is not pressed 10 kΩ or higher
      T10-37 (OPN) - T10-40 (GND) OPEN switch is pressed Below 1 Ω
      T10-37 (OPN) - T10-40 (GND) OPEN switch is not pressed 10 kΩ or higher
      Table 1. Text in Illustration
      *1

      Component without harness connected

      (Roof Sunshade Switch (Map Light Assembly))

      If the result is not as specified, the roof sunshade switch (map light assembly) may be malfunctioning.