Click here

REAR POWER WINDOW SWITCH INSPECTION

Click here
Click here Click here
  1. Click here

    INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY (for LH Side)


    1. A019NDME05

      Check the switch function.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        2 (UP) - 5 (GND) Auto up or up position Below 1 Ω
        4 (AUTO) - 5 (GND) Auto up or auto down position Below 1 Ω
        10 (DOWN) - 5 (GND) Auto down or down position Below 1 Ω
        2 (UP) - 5 (GND) Free 10 kΩ or higher
        4 (AUTO) - 5 (GND) Free 10 kΩ or higher
        10 (DOWN) - 5 (GND) Free 10 kΩ or higher
        Table 1. Text in Illustration
        *1

        Component without harness connected

        (to Rear Power Window Regulator Switch Assembly (for Rear LH Side))

        If the result is not as specified, replace the rear power window regulator switch assembly (for rear LH side).

    2. A019NDME08

      Check that the LED illuminates.


      1. Apply battery voltage to the rear power window regulator switch assembly and check that the LED illuminates.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 8 (LED)

        Battery negative (-) → 5 (GND)

        		 LED illuminates
        Table 2. Text in Illustration
        *1

        Component without harness connected

        (to Rear Power Window Regulator Switch Assembly (for Rear LH Side))

        If the result is not as specified, replace the rear power window regulator switch assembly (for rear LH side).

  2. Click here

    INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY (for RH Side)


    1. A019NDME05

      Check that the switch function.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        2 (UP) - 5 (GND) Auto up or up position Below 1 Ω
        4 (AUTO) - 5 (GND) Auto up or auto down position Below 1 Ω
        10 (DOWN) - 5 (GND) Auto down or down position Below 1 Ω
        2 (UP) - 5 (GND) Free 10 kΩ or higher
        4 (AUTO) - 5 (GND) Free 10 kΩ or higher
        10 (DOWN) - 5 (GND) Free 10 kΩ or higher
        Table 3. Text in Illustration
        *1

        Component without harness connected

        (to Rear Power Window Regulator Switch Assembly (for Rear RH Side))

        If the result is not as specified, replace the rear power window regulator switch assembly (for rear RH side).

    2. A019NDME08

      Check that the LED illuminates.


      1. Apply battery voltage to the rear power window regulator switch assembly and check that the LED illuminates.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → 8 (LED)

        Battery negative (-) → 5 (GND)

        		 LED illuminates
        Table 4. Text in Illustration
        *1

        Component without harness connected

        (to Rear Power Window Regulator Switch Assembly (for Rear RH Side))

        If the result is not as specified, replace the rear power window regulator switch assembly (for rear RH side).