FRONT CONSOLE BOX REMOVAL

REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
1. Turn the shift lever knob sub-assembly counterclockwise and remove the shift lever knob sub-assembly.
REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY
1. Move the shift lever to N.
2. Pull the upper console panel sub-assembly in the direction indicated by the arrow to disengage the 4 claws and 4 clips.
3. w/o Seat Heater System:
  1. Disconnect the connector from the console box hole cover.
4. w/ Seat Heater System:
  1. Disengage the 6 claws.
  2. Disconnect the connector and remove the seat heater switch with console box hole cover.
5. Pull the upper console panel sub-assembly in the direction indicated by the arrow to disengage the 3 claws and 3 clips.
6. Disconnect each connector.
7. Disengage the clamp and remove the upper console panel sub-assembly.
REMOVE NO. 2 CONSOLE BOX DUCT
1. Disconnect each connector and disengage the 2 clamps.
2. Remove the 2 screws and the No. 2 console box duct.
REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY
1. w/o Rear Seat Entertainment System:
  1. Disengage the 5 claws and 6 clips, and remove the console rear end panel sub-assembly.
2. w/ Rear Seat Entertainment System:
  1. Disengage the 5 claws and 6 clips.
  2. Disconnect each connector and remove the console rear end panel sub-assembly.
REMOVE REAR CONSOLE BOX ASSEMBLY
1. Text in Illustration
  
  *1 Screw
  
  *2 Bolt
  
  Remove the 2 screws and 4 bolts.
2. Pull the rear console box assembly in the direction indicated by the arrow (1) to disengage the 8 guides and remove the rear console box assembly as shown in the illustration.
  
  Note
  
  Make sure to remove the rear console box assembly in the direction indicated by the arrow (2). Failure to do so will damage the console box and front seat.

Text in Illustration
*1	Screw
*2	Bolt