2GR-FE COMPRESSOR DISASSEMBLY


  1. REMOVE MAGNETIC CLUTCH ASSEMBLY


    1. A019PFKE01

      Place the compressor and magnetic clutch in a vise.

    2. Using SST, hold the magnetic clutch hub.

      SST
      09985-00270

    3. Remove the bolt, magnetic clutch hub and magnetic clutch washers.

      Tech Tips

      There is no set number of magnetic clutch washers because they are used for adjustment.

    4. A019OSJ

      Using a snap ring expander, remove the snap ring and then remove the magnetic clutch rotor.

      Note

      Take care not to damage the seal cover of the bearing when removing the snap ring.

    5. A019K21

      Disconnect the connector.

    6. Disengage the clamp.

    7. Remove the screw and bracket.

    8. A019P5C

      Using a snap ring expander, remove the snap ring and magnetic clutch stator.