Click here

REAR CENTER SEAT INNER BELT ASSEMBLY INSPECTION

Click here
Click here Click here
  1. Click here

    INSPECT REAR SEAT INNER BELT ASSEMBLY CENTER


    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (CBR+) - 2 (CBR-) Rear seat belt center fastened Below 1 Ω
      1 (CBR+) - 2 (CBR-) Rear seat belt center not fastened 10 kΩ or higher
      Table 1. Text in Illustration
      *1

      Component without harness connected

      (Rear Seat Inner Belt Assembly Center)

      If the result is not as specified, replace the rear seat inner belt assembly center.