REAR SEAT INNER BELT ASSEMBLY (for LH Side) INSTALLATION


  1. INSTALL REAR SEAT INNER BELT ASSEMBLY


    1. A019OTU

      Install the rear sear inner belt assembly with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

    2. Connect the connector.

  2. INSTALL REAR SEAT CUSHION COVER WITH PAD


    1. A019MUK

      Using hog ring pliers, install 2 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    2. A019PJ3

      Engage the 2 hooks.

    3. A019JUP

      Using hog ring pliers, install 2 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    4. Engage each hook as shown in the illustration.

      A019K0M
    5. A019OXS

      Engage the 2 elastic bands to install the rear seat cushion cover with pad.

  3. INSTALL REAR SEAT CUSHION MOULDING RH


    1. A019PJL

      Engage the 4 claws.

    2. Install the rear seat cushion moulding RH with the 3 screws.

  4. INSTALL REAR SEAT CUSHION MOULDING LH


    1. A019M81

      Engage the guide as shown in the illustration.

    2. A019P1Y

      Engage the 2 guides.

    3. Install the rear seat cushion moulding LH with the 2 screws.

  5. INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE LH


    1. A019KZL

      Install the No. 1 reclining adjuster release handle LH with the 3 screws.

  6. INSTALL REAR SEAT COVER CAP


    1. A019KVH

      Engage the 3 claws to install the rear seat cover cap.

  7. INSTALL REAR CENTER SEAT INNER BELT ASSEMBLY


    1. A019OFU

      Install the rear center seat inner belt assembly with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

    2. Engage each clamp and connect each connector.

  8. INSTALL REAR SEAT ASSEMBLY LH


    1. Install the rear seat assembly LH Click here.