OCCUPANT DETECTION SENSOR INSTALLATION


  1. INSTALL SEPARATE TYPE FRONT SEAT CUSHION PAD (w/o Seat Cushion Front Edge Adjustment Function)


    1. A019KIJ

      Using hog rings pliers, install the separate type front seat cushion pad to the separate type front seat cushion cover with 19 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

    2. A019NSJ

      Using hog ring pliers, install the separate type front seat cushion cover with 2 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

  2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION PAD (w/ Seat Cushion Front Edge Adjustment Function)


    1. A019NNY

      Using hog ring pliers, install the separate type front seat cushion pad to the separate type front seat cushion cover with 15 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

    2. A019NSJ

      Using hog ring pliers, install the separate type front seat cushion pad to the separate type front seat cushion cover with 2 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

  3. INSTALL FRONT SEAT CUSHION COVER WITH PAD (w/o Seat Cushion Front Edge Adjustment Function)


    1. w/o Climate Control Seat System:


      1. A019LAD

        Engage the 5 clamps.

    2. w/ Climate Control Seat System:


      1. A019NGQ

        Engage the 6 clamps.

      2. Connect the 2 connectors.

    3. for Front Passenger Side:


      1. A019LHQ

        Engage the 2 clamps and connect the occupant detection sensor connector.

    4. Engage each hook as shown in the illustration.

      A019LBI

    5. Install the 2 clips.

    6. A019NWJ

      Engage the 6 hooks and install the front seat cushion cover with pad.

  4. INSTALL FRONT SEAT CUSHION COVER WITH PAD (w/ Seat Cushion Front Edge Adjustment Function)


    1. A019OSO

      Using hog ring pliers, install 2 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    2. A019LSQ

      Engage the 4 hooks.

    3. Engage each hook as shown in the illustration.

      A019NLA

    4. for Front Passenger Side:


      1. A019LHQ

        Engage the 2 clamps and connect the occupant detection sensor connector.

    5. Install the 2 clips.

    6. A019NWJ

      Engage the 6 hooks and install the front seat cushion cover with pad.

  5. INSTALL POWER SEAT SWITCH


    1. A019LS6

      Connect the 2 connectors.

    2. A019PJS

      Engage the guide.

    3. Install the power seat switch with the 3 screws.

  6. INSTALL FRONT SEAT CUSHION INNER SHIELD


    1. A019O3R

      Engage the guide and temporarily install the front seat cushion inner shield as shown in the illustration.

    2. A019KFH

      Engage the claw.

    3. Install the front seat cushion inner shield with the screw.

  7. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY


    1. w/ Seat Cushion Front Edge Adjustment Function:


      1. A019KCL

        Connect the connector.

      2. Engage the 2 clamps to the install the seat wire to front seat cushion shield assembly with seat variable cushion switch.

    2. A019LBE

      Connect the connector to the lumbar switch.

    3. A019NLO

      Engage the guide and claw.

    4. Install the front seat cushion shield assembly with the 5 screws.

    5. A019K8L

      Engage the 2 hooks and install the 2 rubber bands of the front seatback board to the seat frame.

  8. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. A019OZE

      Engage the 4 claws and install the slide and vertical power seat switch knob.

  9. INSTALL RECLINING POWER SEAT SWITCH KNOB


    1. A019P8G

      Engage the 4 claws and install the reclining power seat switch knob.

  10. INSTALL FRONT SEAT INNER BELT ASSEMBLY


    1. A019M8KE01
      Text in Illustration
      *1 Protruding Part

      Install the front seat inner belt assembly with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of front seat adjuster.

    2. Connect each connector and clamp.

  11. INSTALL FRONT SEAT ASSEMBLY (for Front Passenger Side)


    1. Install the front seat assembly Click here.