LUMBAR SUPPORT ADJUSTER ASSEMBLY REMOVAL


  1. REMOVE FRONT SEAT HEADREST ASSEMBLY


    1. A019O82

      Press the headrest support button and pull up the headrest as shown in the illustration to remove it.

  2. REMOVE FRONT OUTER SEAT TRACK BRACKET COVER


    1. Operate the power seat switch knob and move the seat to the rearmost position.

    2. A019NLG

      Disengage the 2 claws and 2 guides, and remove the front outer seat track bracket cover as shown in the illustration.

  3. REMOVE FRONT INNER SEAT TRACK BRACKET COVER


    1. A019LY7

      Disengage the 2 claws and 2 guides, and remove the front inner seat track bracket cover as shown in the illustration.

  4. REMOVE REAR OUTER SEAT TRACK BRACKET COVER


    1. A019NBG

      Disengage the 4 claws and remove the rear outer seat track bracket cover as shown in the illustration.

  5. REMOVE REAR INNER SEAT TRACK BRACKET COVER


    1. A019LZ9

      Disengage the 4 claws and remove the rear inner seat track bracket cover as shown in the illustration.

  6. REMOVE FRONT SEAT ASSEMBLY


    1. Operate the power seat switch knob and move the seat to the foremost position.

    2. A019OSZ

      Remove the 2 bolts on the rear side of the seat.

    3. Operate the power seat switch knob and move the seat to the rearmost position.

    4. A019KOE

      Remove the 2 bolts on the front side of the seat.

    5. Operate the power seat switch knob and move the seat to the center position. Also, operate the power seat switch knob and move the seatback to the upright position.

    6. w/ Navigation System for HDD:

      Note

      After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

    7. Disconnect the cable from the negative (-) battery terminal.

      CAUTION:

      Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system Click here.

      Note

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

    8. Disconnect the connectors under the seat.

    9. Remove the front seat assembly.

      Note

      Be careful not to damage the vehicle body.

  7. REMOVE FRONT SEAT INNER BELT ASSEMBLY


    1. Disconnect each connector and clamp.

    2. A019KQD

      Remove the nut and the front seat inner belt assembly.

  8. REMOVE RECLINING POWER SEAT SWITCH KNOB


    1. A019KY1

      Using a moulding remover, disengage the 4 claws and remove the reclining power seat switch knob.

  9. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. A019L87

      Using a moulding remover, disengage the 2 claws as shown in the illustration.

    2. A019LJJ

      Using a moulding remover, disengage the 2 claws and remove the slide and vertical power seat switch knob.

  10. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY


    1. A019K8L

      Disengage the 2 hooks and remove the 2 rubber bands of the front seatback board from the front seat frame.

    2. A019NLO

      Remove the 5 screws.

    3. Disengage the claw and guide.

    4. Disconnect the connector from the front power seat lumbar switch.

    5. w/ Seat Cushion Front Edge Adjustment Function:


      1. A019KCL

        Disengage the 2 clamps.

      2. Disconnect the connector from the seat variable cushion switch.

    6. Remove the front seat cushion shield assembly.

  11. REMOVE FRONT SEAT CUSHION INNER SHIELD


    1. A019KFH

      Remove the screw.

    2. Disengage the claw.

    3. A019KC1

      Separate the guide and remove the front seat cushion inner shield as shown in the illustration.

  12. REMOVE POWER SEAT SWITCH


    1. A019PJS

      Remove the 3 screws.

    2. Disengage the guide.

    3. A019LS6

      Disconnect the 2 connectors and remove the power seat switch.

  13. REMOVE FRONT SEAT CUSHION COVER WITH PAD (w/o Seat Cushion Front Edge Adjustment Function)


    1. A019NWJ

      Disengage the 6 hooks.

    2. w/o Climate Control Seat System:


      1. A019LAD

        Disengage the 5 clamps.

    3. w/ Climate Control Seat System:


      1. A019NGQ

        Disconnect the 2 connectors.

      2. Disengage the 6 clamps.

    4. Using a clip remover, remove the 2 clips.

      A019MTH

      for Front Passenger Side:


      1. A019LHQ

        Disengage the 2 clamps and separate the occupant detection sensor connector.

    5. Disengage each hook and remove the front seat cushion cover with pad.

  14. REMOVE FRONT SEAT CUSHION COVER WITH PAD (w/ Seat Cushion Front Edge Adjustment Function)


    1. A019NWJ

      Disengage the 6 hooks.

    2. w/o Climate Control Seat System:


      1. A019LAD

        Disengage the 5 clamps.

    3. w/ Climate Control Seat System:


      1. A019NGQ

        Disconnect the 2 connectors.

      2. Disengage the 6 clamps.

    4. Using a clip remover, remove the 2 clips.

      A019MTH

    5. for Front Passenger Side:


      1. A019LHQ

        Disengage the 2 clamps and separate the occupant detection sensor connector.

    6. Disengage each hook.

    7. A019LSQ

      Disengage the 4 hooks.

    8. A019MEE

      Remove the 2 hog rings.

    9. Remove the front seat cushion cover with pad.

  15. REMOVE TELEVISION BASE (w/ Rear Seat Entertainment System)


    1. A019JM3

      Using a moulding remover, disengage the 3 claws and 3 guides, and remove the television base.

  16. REMOVE TELEVISION DISPLAY ASSEMBLY (w/ Rear Seat Entertainment System)


    1. A019LQH

      Disconnect the connector.

    2. Remove the 3 nuts and television display assembly.

  17. REMOVE NO. 2 TELEVISION BASE (w/ Rear Seat Entertainment System)


    1. A019M86

      Remove the 4 screws.

    2. A019KBU

      Using a clip remover, remove the 5 clips.

    3. Disengage the 2 guides and remove the No. 2 television base.

  18. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY


    1. A019LFS

      Remove the 2 screws.

    2. A019K72

      Disengage the 2 guides and remove the front seatback board sub-assembly as shown in the illustration.

  19. REMOVE FRONT SEATBACK BOARD COVER SUB-ASSEMBLY


    1. A019KI1

      Disengage the 2 guides and remove the front seatback board cover sub-assembly.

  20. REMOVE FRONT SEATBACK COVER WITH PAD


    1. A019NYZ

      Disengage the 2 hooks.

    2. A019N32

      Remove the 5 hog rings.

    3. A019M9S

      Disengage the 6 hooks as shown in the illustration.

    4. A019M32

      Remove the nut.

    5. Disengage the guide and remove the seatback cover bracket.

    6. Remove the front seatback cover with pad from the seatback frame.

  21. REMOVE FRONT SEAT HEADREST SUPPORT


    1. A019OYX

      Disengage the 4 claws and remove the 2 headrest supports.

  22. REMOVE SEATBACK CLIMATE CONTROL BLOWER (w/ Climate Control Seat System)


    1. for Driver Side:


      1. A019LKZ

        Disconnect the connector.

      2. Disengage the 3 clamps.

    2. for Front Passenger Side:


      1. A019LB5

        Disconnect the connector.

      2. Disengage the clamp.

    3. A019NR1

      Disengage the clamp.

    4. Using a T30 ''TORX'' socket, remove the 6 ''TORX'' bolts and remove the seatback climate control blower and the seatback climate control cover.

  23. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY


    1. A019MVQ

      Disengage the 4 guides and remove the seatback felt.

    2. A019O99

      Disengage the 4 guides.

    3. A019PCA

      Disengage the 2 guides and remove the front seatback spring sub-assembly as shown in the illustration.

    4. A019NGU

      Disconnect the connector.

    5. Remove the 2 screws.

    6. Disengage the guide and remove the lumbar support adjuster assembly.

    7. A019N39

      Remove the bush.