REAR SEAT ASSEMBLY (for RH Side) REASSEMBLY


  1. INSTALL REAR SEAT CUSHION SPRING ASSEMBLY RH


    1. A019N8O

      Using a T45 "TORX" socket wrench, install the rear seat cushion spring assembly with the 4 bolts and 4 bushes.

      Torque:
      21 N*m  { 214 kgf*cm, 16 ft.*lbf }

  2. INSTALL REAR SEAT RECLINING CONTROL CABLE


    1. A019KBS

      Engage the claw to install the rear seat hook.

    2. Engage the 4 rear seat hooks.

    3. Engage the 6 cable clamps and install the rear seat reclining control cable.

      A019JXH

  3. INSTALL NO. 2 REAR SEAT COVER


    1. A019NJ3

      Install the No. 2 rear seat cover with the screw.

  4. INSTALL NO. 1 REAR SEAT COVER


    1. A019PCD

      Install the No. 1 rear seat cover with the screw.

  5. INSTALL REAR SEAT RECLINING INNER COVER RH


    1. A019NWF

      Engage the 2 guides.

    2. Install the rear seat reclining inner cover RH with the screw.

  6. INSTALL REAR SEAT CUSHION SIDE COVER LH


    1. A019NY4

      Engage the claw.

    2. Install the rear seat cushion side cover LH with the 2 screws.

  7. INSTALL REAR SEAT CUSHION MOULDING RH


    1. A019KT7

      Engage the 3 claws.

    2. Install the rear seat cushion moulding RH with the 3 screws.

  8. INSTALL REAR SEATBACK COVER RH


    1. A019PDF

      Engage the claw.

    2. Install the rear seatback cover RH with the 2 screws.

  9. INSTALL SEPARATE TYPE REAR SEATBACK COVER


    1. A019N6M

      Using hog ring pliers, install the separate type rear seatback cover with 12 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    2. A019OFQ

      As shown in the illustration, pass the bracket of the separate type rear seatback cover through the separate type rear seatback pad.

      Note

      After installing the bracket, check that the band is not twisted.

  10. INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY


    1. A019OJV

      Install the rear center seat outer belt assembly with the bolt and nut.

      Torque:
      Bolt
      7.5 N*m  { 77 kgf*cm, 66 in.*lbf }
      Nut
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  11. INSTALL REAR SEAT SHOULDER BELT COVER


    1. A019OH1

      Engage the claw and guide, and install the rear seat shoulder belt cover as shown in the illustration.

    2. A019MSF

      Engage the 3 claws to install the belt support plate.

  12. INSTALL REAR SEATBACK COVER WITH PAD


    1. A019KA1E01
      Text in Illustration
      *1 Side Airbag

      Temporarily install the side airbag so that it is stored inside the rear seatback cover with pad.

    2. Install bracket A onto the bolt and insert the guide.

      A019MD7E01
      Text in Illustration
      *1 Bracket A *2 Bracket B

    3. Install bracket B onto the bolt and insert the guide.

    4. Install the rear seatback cover bracket with the nut.

      Torque:
      5.6 N*m  { 57 kgf*cm, 50 in.*lbf }

      Note


      • For vehicles with side airbags, the side airbags may not be activated normally unless the rear seatback cover is securely installed.

      • Check that the strap is not twisted after installing the bracket.

      • Install the bracket securely.

    5. A019NSU

      Using hog ring pliers, install a new hog ring.

      Note


      • Be careful not to damage the cover.

      • When installing the hog ring, take care to minimize wrinkles as much as possible.

    6. Engage the hook.

    7. A019OX9

      Install the rear seat belt hook with the bolt.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }
    8. A019L6O

      Using hog ring pliers, install 6 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    9. Engage the 5 hooks.

    10. A019KHRE01
      Text in Illustration
      *1 Fastener

      Engage the 2 fasteners and install the rear seatback cover with pad.

  13. INSTALL REAR SEAT HEADREST SUPPORT RH


    1. A019NV5

      Engage the 2 claws to install the rear seat headrest support RH.

  14. INSTALL REAR SEAT HEADREST SUPPORT LH


    1. A019MOR

      Engage the 2 claws to install the rear seat headrest support LH.

  15. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY


    1. A019NOF

      Connect the rear center seat outer belt assembly with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  16. INSTALL REAR SEAT SHOULDER BELT HOLE COVER


    1. A019OP9

      Move the rear seat shoulder belt hole cover in the direction indicated by the arrow in the illustration to engage the 2 guides.

    2. Move the rear seat shoulder belt hole cover in the direction indicated by the arrow in the illustration to engage the 2 claws and install the cover.

  17. INSTALL SEAT BELT ANCHOR COVER CAP


    1. A019JV4

      Engage the 2 claws and install the seat belt anchor cover cap.

  18. INSTALL NO. 1 FOLD SEAT STOPPER BAND ASSEMBLY


    1. A019NOT

      Engage the guide.

    2. Install the No. 1 fold seat stopper band assembly with the bolt.

      Torque:
      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }

  19. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY RH


    1. A019NBV

      Engage the guide.

    2. Engage the 2 clips and install the rear seatback board carpet assembly RH.

  20. INSTALL REAR SEATBACK COVER RH


    1. A019OYE

      Engage the 4 claws to install the rear seatback cover RH.

  21. INSTALL TONNEAU COVER HOOK HOLDER


    1. A019OPL

      Engage the 2 guides.

    2. Install the 2 tonneau cover hook holders with the 2 screws.

  22. INSTALL REAR SEAT LOCK STRIKER


    1. A019LQ2

      Using a T45 "TORX" socket, install the "TORX" bolt to the rear seat lock striker.

      Torque:
      21 N*m  { 214 kgf*cm, 16 ft.*lbf }

  23. INSTALL REAR SEATBACK LOCK STRIKER PROTECTOR


    1. A019LYM

      Install the rear seatback lock striker protector.

  24. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER


    1. A019PLK

      Using hog ring pliers, install the separate type rear seat cushion cover with 11 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

  25. INSTALL REAR SEAT CUSHION COVER WITH PAD


    1. A019P2Z

      Using hog ring pliers, install 2 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    2. A019JWQ

      Using hog ring pliers, install 2 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    3. A019M7W

      Engage the 2 elastic bands.

    4. A019OQH

      Engage each hook.

    5. A019NR2

      Engage the 2 hooks to install the rear seat cushion cover with pad.

  26. INSTALL REAR SEAT CUSHION MOULDING RH


    1. A019JVX

      Engage the 2 guides as shown in the illustration.

    2. Install the rear seat cushion moulding RH with the 2 screws.

  27. INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE RH


    1. A019ODZ

      Install the No. 1 reclining adjuster release handle RH with the 3 screws.

  28. INSTALL REAR SEAT COVER CAP


    1. A019JNQ

      Engage the 3 claws to install the rear seat cover cap.

  29. INSTALL REAR SEAT CENTER ARMREST BOX


    1. A019LPK

      Install the rear seat center armrest box.

  30. INSTALL REAR SEAT CENTER ARMREST DOOR SUB-ASSEMBLY


    1. A019O3G

      Install the rear seat center armrest door sub-assembly with the 2 screws.

  31. INSTALL CUP HOLDER


    1. A019N68

      Engage the 2 clips.

    2. Install the cup holder with the 2 screws.

  32. INSTALL REAR SEAT CENTER ARMREST ASSEMBLY

  33. INSTALL NO. 2 REAR SEAT RECLINING SPACER


    1. A019JVD

      Install the No. 2 rear seat reclining spacer to the rear seat center armrest assembly.

  34. INSTALL REAR SEAT CENTER ARMREST SUPPORT RH


    1. A019LOV

      Engage the guide and install the nut.

    2. A019N01

      Using a T45 "TORX" socket, remove the "TORX" bolt, bush, and the rear seat center armrest support RH.

      Torque:
      13 N*m  { 128 kgf*cm, 9 ft.*lbf }

  35. INSTALL REAR SEATBACK MOULDING RH


    1. A019OZK

      Engage the 2 guides.

    2. Install the rear seatback moulding RH with the 3 screws.

  36. INSTALL REAR SEATBACK MOULDING LH


    1. A019OF1

      Engage the 2 guides.

    2. Install the rear seatback moulding LH with the 3 screws.

  37. INSTALL REAR CENTER SEATBACK HINGE


    1. A019OLN

      Using a T45 "TORX" socket, remove the "TORX" bolt, bush, and the rear center seatback hinge.

      Torque:
      21 N*m  { 214 kgf*cm, 16 ft.*lbf }

  38. REMOVE REAR SEATBACK HINGE LH


    1. A019K7B

      Using a T45 "TORX" socket, remove the "TORX" bolt, bush, and the rear seatback hinge LH.

      Torque:
      21 N*m  { 214 kgf*cm, 16 ft.*lbf }

  39. INSTALL CENTER SEAT CUSHION FRAME SUB-ASSEMBLY


    1. A019P27

      Using a T45 "TORX" socket, tighten the 2 "TORX" bolts and 2 bushes and install the center seat cushion frame sub-assembly.

      Torque:
      21 N*m  { 214 kgf*cm, 16 ft.*lbf }

  40. INSTALL NO. 2 CENTER SEATBACK COVER


    1. A019JLB

      Engage the 2 claws.

    2. Install the No. 2 center seatback cover with the screw.

  41. INSTALL NO. 1 SEATBACK COVER


    1. A019LWC

      Connect the rod as shown in the illustration.

    2. A019LV8

      Engage the guide.

    3. Install the rear seat reclining cover with the 2 screws.

  42. INSTALL COAT HOOK CAP


    1. A019K73

      Engage the 2 claws and guide, and install the coat hook cap as shown in the illustration.

  43. INSTALL REAR SEAT CENTER HEADREST SUPPORT RH


    1. A019MKQ

      Engage the 2 claws to install the rear seat center headrest support RH.

  44. INSTALL REAR SEAT CENTER HEADREST SUPPORT LH


    1. A019MQY

      Engage the 2 claws to install the rear seat center headrest support LH.

  45. INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY


    1. A019KDA

      Disengage the 4 clips and install the rear seatback board sub-assembly.

  46. INSTALL REAR SEATBACK LOCK COVER RH


    1. A019P4K

      Engage the 4 guides and claw, and install the rear seatback lock cover RH as shown in the illustration.

  47. INSTALL REAR CENTER SEATBACK COVER


    1. A019NOE

      Engage the 4 claws to install the rear center seatback cover.

  48. INSTALL CENTER SEAT CUSHION COVER SUB-ASSEMBLY


    1. A019LO9

      Engage the center seat cushion cover sub-assembly to the center seat cushion as shown in the illustration.

  49. INSTALL CENTER SEAT CUSHION COVER WITH PAD


    1. A019N9J

      Engage each hook as shown in the illustration.

    2. A019OR4

      Engage the 2 hooks and install the center seat cushion cover with pad as shown in the illustration.

  50. INSTALL RECLINING COVER PROTECTOR RH


    1. A019JMT

      Engage the reclining cover protector RH as shown in the illustration.

    2. A019NM7

      Install the screw.

    3. Install the reclining cover protector RH with the clip.

  51. INSTALL RECLINING COVER PROTECTOR LH


    1. A019N17

      Engage the reclining cover protector LH as shown in the illustration.

    2. A019LLI

      Install the screw.

    3. Install the reclining cover protector LH with the clip.

  52. INSTALL REAR CENTER SEAT ASSEMBLY


    1. A019P2B

      Engage the elastic band.

    2. A019OO4

      Install the rear seat center seat assembly with the 4 bolts.

      Torque:
      21 N*m  { 214 kgf*cm, 16 ft.*lbf }

  53. INSTALL UPPER CENTER SEAT HINGE COVER LH


    1. A019O0G

      Install the upper center seat hinge cover LH.

  54. INSTALL REAR SEAT INNER BELT ASSEMBLY


    1. A019MC2

      Install the rear seat inner belt assembly with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

    2. Engage each clamp and connect the connector.