REAR SEAT ASSEMBLY (for RH Side) REMOVAL


  1. REMOVE REAR SEAT HEADREST ASSEMBLY RH


    1. A019P7R

      Press the headrest support button and pull up the headrest as shown in the illustration.

  2. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY


    1. A019KYI

      Press the headrest support button and pull up the headrest as shown in the illustration.

  3. REMOVE REAR SEAT TRACK BRACKET COVER RH


    1. A019NBE

      Disengage the 8 claws and remove the 2 rear seat track bracket cover RH.

  4. DISCONNECT REAR SEAT LOCK CABLE ASSEMBLY RH


    1. A019LW5

      Using a clip remover, remove the 2 clips and disconnect the rear seatback board sub-assembly.

    2. A019KLS

      Using a clip remover, remove the 3 clips and disconnect the rear seatback board carpet assembly RH.

    3. A019NRZ

      Remove the bolt.

    4. Disengage the guide and disconnect the No. 1 fold seat stopper band assembly.

    5. Pull down the adjusters lock piece to release the lock as shown in the illustration.

      A019OG2E01
      Text in Illustration
      *1 Adjusters Spring *2 Lock Piece
    6. A019PCRE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver wrapped with protective tape, disconnect the No. 1 reclining control cable as shown in the illustration.

    7. A019NH7

      Remove the rear seat reclining control cable from the cover as shown in the illustration.

    8. Lift up the seat track adjusting handle to the uppermost position and hold the handle in this position as shown in the illustration.

      A019N5GE01
      Text in Illustration
      *1 Seat Track Adjusting *2 Protective Tape

    9. Using a screwdriver wrapped with protective tape, disconnect the No. 1 rear seat lock cable assembly as shown in the illustration.

    10. Using a screwdriver wrapped with protective tape, disconnect the rear seat lock cable assembly RH as shown in the illustration.

      A019M3LE01
      Text in Illustration
      *1 Protective Tape

    11. When replacing the rear seat assembly RH or rear seat reclining control cable with a new one:


      1. A019NMZE01

        Cut portion A shown in the illustration to separate the rear seat assembly RH or rear seat reclining control cable.

    12. When replacing the rear seat lock cable assembly RH with a new one:


      1. A019KGTE01

        Cut portion A shown in the illustration to separate the rear seat lock assembly RH.

  5. REMOVE REAR SEAT ASSEMBLY RH


    1. w/ Rear Seat Side Airbag:


      1. A019JTC

        Disconnect the connector.

    2. A019PE0

      Remove the 3 bolts on the rear side of the seat.

    3. A019JSJ

      Remove the 2 bolts on the front side of the seat and the rear seat assembly RH.

      Note

      Be careful not to damage the vehicle body.