REAR SEAT ASSEMBLY (for LH Side) REMOVAL


  1. REMOVE REAR SEAT HEADREST ASSEMBLY LH


    1. A019MUO

      Press the headrest support button and pull up the headrest as shown in the illustration.

  2. REMOVE REAR SEAT TRACK BRACKET COVER LH


    1. A019P4B

      Disengage the 8 claws and remove the 2 rear seat track bracket cover LH.

  3. DISCONNECT REAR SEAT LOCK CABLE ASSEMBLY LH


    1. A019JQW

      Remove the 4 clips.

    2. A019KZY

      Remove the bolt.

    3. Disengage the guide and disconnect the No. 1 fold seat stopper band assembly.

    4. Pull down the adjuster lock piece to release the lock as shown in the illustration.

      A019NPXE01
      Text in Illustration
      *1 Adjuster Spring *2 Lock Piece
    5. A019P34E01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver wrapped with protective tape, disconnect the No. 2 reclining control cable as shown in the illustration.

    6. A019NKW

      Remove the rear seat reclining control cable from the cover as shown in the illustration.

    7. Lift up the seat track adjusting handle to the uppermost position and hold the handle in this position as shown in the illustration.

      A019MRME01
      Text in Illustration
      *1 Seat Track Adjusting *2 Protective Tape

    8. Using a screwdriver wrapped with protective tape, disconnect the No. 2 rear seat reclining control cable as shown in the illustration.

    9. Using a screwdriver wrapped with protective tape, disconnect the rear seat lock cable assembly LH as shown in the illustration.

      A019LGQE01
      Text in Illustration
      *1 Protective Tape

    10. When replacing the rear seat assembly LH or No. 2 rear seat reclining control cable with a new one:


      1. A019NMZE01

        Cut portion A shown in the illustration to separate the rear seat assembly LH or No. 2 rear seat reclining control cable.

    11. When replacing the rear seat lock cable assembly LH with a new one:


      1. A019KGTE01

        Cut portion A shown in the illustration to separate the rear seat lock assembly LH.

  4. REMOVE REAR SEAT ASSEMBLY LH


    1. w/ Rear Seat Side Airbag:


      1. A019MGI

        Disconnect the connector.

    2. A019PHD

      Remove the 3 bolts on the rear side of the seat.

    3. A019O6N

      Remove the 2 bolts on the front side of the seat and the rear seat assembly LH.

      Note

      Be careful not to damage the vehicle body.