FRONT POWER SEAT CONTROL SYSTEM (w/ Memory) Power Seat does not Return to Memorized Position

DESCRIPTION

• for driver side

  When any of the M1 switch, M2 switch or M3 switch is pressed, the outer mirror control ECU assembly (driver side) sends a switch signal to the main body ECU (multiplex network body ECU) via CAN. Then, the main body ECU (multiplex network body ECU) sends a recall request signal to the front power seat switch (driver side). The front power seat switch (driver side) operates each motor to achieve each memorized position value.

• for front passenger side

  When any of the M1 switch, M2 switch or M3 switch is pressed, the outer mirror control ECU assembly (front passenger side) sends a switch signal to the front power seat switch (front passenger side) via CAN. Then, the front power seat switch (front passenger side) operates the motors to recall each memorized position value.

INSPECTION PROCEDURE

PROCEDURE

1. Click here

   CHECK CAN COMMUNICATION SYSTEM

   
   

   1. Use the intelligent tester to check if the CAN communication system is functioning normally (Click here).

      OK
      CAN communication DTC is not output.

   
   
   • OKClick here
   • NGClick here
2. Click here

   CHECK POWER SEAT CONTROL FUNCTION

   
   

   1. Check that each function of the power seat operates normally by using the switches on the front power seat switch (Click here).

      OK
      Each function of the power seat operates normally using the switches on the front power seat switch.

   
   
   • OKClick here
   • NGClick here
3. Click here

   CHECK SEAT MEMORY FUNCTION

   
   

   1. Perform a memory operation and check that the buzzer sounds to indicate the completion of the memory operation (Click here).

      Note:
      

      • The seat position will not be recorded if the SET switch and 2 or more of the memory switches (for example, M1 switch and M2 switch) are pressed simultaneously.

      • If a memorizing operation has failed, release all switches. The seat memory function does not operate unless the switches are released.

      OK
      Seat position memory function is normal.

   
   
   • OKClick here
   • NGClick here
4. Click here

   CHECK FOR DTC

   
   

   1. Check for DTC P0705.

   2. Clear the DTC (Click here).

   3. Recheck for DTC P0705.

      Result
      Result Proceed to DTC P0705 is not output A DTC P0705 is output (for 2GR-FE) B DTC P0705 is output (for 1AR-FE) C

   
   
   • AClick here
   • BClick here
   • CClick here
5. Click here

   CHECK SEAT RESTORING FUNCTION

   
   

   1. Under each of the following conditions, check that the seat restoring operation operates by pressing the M1 switch, M2 switch or M3 switch (Click here).

      Tip:
      

      • Engine switch is on (ACC) or on (IG), Shift lever is in P.

      • Engine switch is off, within 180 seconds after driver door is closed and opened.

      • Engine switch is off, within 60 seconds after driver door is opened and closed (only driver side).

      Result
      Result Proceed to Driver side seat restoring function does not operate A Front passenger side seat restoring function does not operate B

   
   
   • AClick here
   • BClick here
6. Click here

   CHECK SEAT RESTORING FUNCTION

   
   

   1. Under each of the following conditions, check that the seat restoring operation operates by pressing the M1 switch, M2 switch or M3 switch (Click here).

      Tip:
      

      • Engine switch is on (ACC) or on (IG), Shift lever is in P.

      • Engine switch is off, within 180 seconds after driver door is closed and opened.

      • Engine switch is off, within 60 seconds after driver door is opened and closed.

      Result
      Result Proceed to Seat restoring operation does not operate A Seat restoring operation operates B

   
   
   • AClick here
   • BClick here
7. Click here

   READ VALUE USING INTELLIGENT TESTER (SEAT POSITION MEMORY)

   
   

   1. Connect the intelligent tester to the DLC3.

   2. Turn the engine switch on (IG).

   3. Turn the intelligent tester on.

   4. Enter the following menus: Body / Driver Seat / Data List.

   5. Read the Data List according to the display on the intelligent tester.

      Table 1. Driver Seat

      Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
      Seat Memory No1	Seat position memorized with M1 switch / Mem or Not Mem	Mem: Memorized Not Mem: Not memorized	-
      Seat Memory No2	Seat position memorized with M2 switch / Mem or Not Mem	Mem: Memorized Not Mem: Not memorized	-
      Seat Memory No3	Seat position memorized with M3 switch / Mem or Not Mem	Mem: Memorized Not Mem: Not memorized	-

      OK
      Mem or Not Mem appears on the screen.

   
   
   • OKClick here
   • NGClick here
8. Click here

   REPLACE FRONT POWER SEAT SWITCH (DRIVER SIDE)

   
   

   1. Replace the front power seat switch (driver side) (Click here).

   
   
   • NEXTClick here
9. Click here

   CHECK POWER MEMORY FUNCTION

   
   

   1. Perform a seat memory operation properly (Click here).

   2. Check that the buzzer sounds for 0.1 seconds and the seat automatically moves to the memorized position.

      Note:
      

      • The seat position will not return to the memorized position if the 2 or more of the seat memory switches (for example, M1 switch and M2 switch) are pressed simultaneously.

      • If a restoring operation has failed, release all switches. The seat memory restoring function does not operate unless the switches are released.

      OK
      Seat position restoring function operates normally.

   
   
   • OKClick here
   • NGClick here
10. Click here

    CHECK SEAT RESTORING FUNCTION

    
    

    1. Under each of the following conditions, check that the seat restoring operation operates by pressing the M1 switch, M2 switch or M3 switch (Click here).

       Tip:
       

       • Engine switch is on (ACC) or on (IG), Shift lever is in P.

       • Engine switch is off, within 180 seconds after driver door is closed and opened.

       Result
       Result Proceed to Seat restoring operation does not operate A Seat restoring operation operates B

    
    
    • AClick here
    • BClick here
11. Click here

    READ VALUE USING INTELLIGENT TESTER

    
    

    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Passenger Seat / Data List.

    5. Read the Data List according to the display on the intelligent tester.

       Table 2. Passenger Seat

       Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
       Seat Memory No1	Seat position memorized with M1 switch / Mem or Not Mem	Mem: Memorized Not Mem: Not memorized	-
       Seat Memory No2	Seat position memorized with M2 switch / Mem or Not Mem	Mem: Memorized Not Mem: Not memorized	-
       Seat Memory No3	Seat position memorized with M3 switch / Mem or Not Mem	Mem: Memorized Not Mem: Not memorized	-

       OK
       Mem or Not Mem appears on the screen.

    
    
    • OKClick here
    • NGClick here
12. Click here

    GO TO CAN COMMUNICATION SYSTEMClick here

13. Click here

    GO TO OTHER FLOW CHART (Power Seat does not Operate with Front Power Seat Switch)Click here

14. Click here

    GO TO OTHER FLOW CHART (Power Seat Position is not Memorized)Click here

15. Click here

    GO TO ENGINE CONTROL SYSTEMClick here

16. Click here

    REPLACE FRONT POWER SEAT SWITCH (DRIVER SIDE)Click here

17. Click here

    GO TO OTHER FLOW CHART (Power Seat Position is not Memorized)Click here

18. Click here

    END (FRONT POWER SEAT SWITCH (DRIVER SIDE) WAS DEFECTIVE)

19. Click here

    REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)Click here

20. Click here

    REPLACE FRONT POWER SEAT SWITCH (FRONT PASSENGER SIDE)Click here

21. Click here

    GO TO OTHER FLOW CHART (Power Seat Position is not Memorized)Click here

22. Click here

    REPLACE FRONT POWER SEAT SWITCH (FRONT PASSENGER SIDE)Click here

23. Click here

    GO TO ENGINE CONTROL SYSTEMClick here