PRE-CRASH BRAKE CANCEL SWITCH REMOVAL


  1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)


    1. A019N4V

      Remove the 2 screws <D>.

    2. A019K8G

      Disengage the claw and 2 guides as shown in the illustration.

    3. Disconnect each connector.

    4. Disengage each clamp and remove the No. 1 instrument panel under cover sub-assembly.

  2. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)


    1. A019N9N

      Remove the 2 screws <D>.

    2. A019L8S

      Disengage the claw and 2 guides as shown in the illustration.

    3. Disconnect each connector.

    4. Disengage each clamp and remove the No. 1 instrument panel under cover sub-assembly.

  3. REMOVE PRE-CRASH SYSTEM CANCEL SWITCH ASSEMBLY (for LHD)


    1. A019MKL

      Disengage the 2 claws and remove the pre-crash system cancel switch assembly.

  4. REMOVE PRE-CRASH SYSTEM CANCEL SWITCH ASSEMBLY (for RHD)


    1. A019NIC

      Disengage the 2 claws and remove the pre-crash system cancel switch assembly.