FRONT SEAT ASSEMBLY DISASSEMBLY


  1. REMOVE RECLINING POWER SEAT SWITCH KNOB


    1. A019KY1

      Using a moulding remover, disengage the 4 claws and remove the reclining power seat switch knob.

  2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. A019L87

      Using a moulding remover, disengage the 2 claws as shown in the illustration.

    2. A019LJJ

      Using a moulding remover, disengage the 2 claws and remove the slide and vertical power seat switch knob.

  3. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY


    1. A019K8L

      Disengage the 2 hooks and remove the 2 rubber bands of the front seatback board from the front seat frame.

    2. A019NLO

      Remove the 5 screws.

    3. Disengage the claw and guide.

    4. Disconnect the connector from the front power seat lumbar switch.

    5. w/ Seat Cushion Front Edge Adjustment Function:


      1. A019KCL

        Disengage the 2 clamps.

      2. Disconnect the connector from the seat variable cushion switch.

    6. Remove the front seat cushion shield assembly.

  4. REMOVE NO. 1 FRONT SEAT CUSHION INNER SHIELD


    1. A019LLA

      Remove the 2 screws.

    2. Disengage the 2 guides and remove the No. 1 front seat cushion inner shield from the front seat cushion shield as shown in the illustration.

  5. REMOVE LUMBAR SWITCH


    1. A019ORL

      Remove the 2 screws and the lumbar switch.

  6. REMOVE SEAT VARIABLE CUSHION SWITCH (w/ Seat Cushion Front Edge Adjustment Function)


    1. A019MNI

      Remove the 2 screws and the seat variable cushion switch.

  7. REMOVE FRONT SEAT INNER BELT ASSEMBLY


    1. Disconnect each connector and clamp.

    2. A019KQD

      Remove the nut and the front seat inner belt assembly.

  8. REMOVE FRONT SEAT CUSHION INNER SHIELD


    1. A019KFH

      Remove the screw.

    2. Disengage the claw.

    3. A019KC1

      Separate the guide and remove the front seat cushion inner shield as shown in the illustration.

  9. REMOVE POWER SEAT SWITCH


    1. A019PJS

      Remove the 3 screws.

    2. Disengage the guide.

    3. A019LS6

      Disconnect the 2 connectors and remove the power seat switch.

  10. REMOVE FRONT SEAT CUSHION COVER WITH PAD (w/o Seat Cushion Front Edge Adjustment Function)


    1. A019NWJ

      Disengage the 6 hooks.

    2. w/o Climate Control Seat System:


      1. A019LAD

        Disengage the 5 clamps.

    3. w/ Climate Control Seat System:


      1. A019NGQ

        Disconnect the 2 connectors.

      2. Disengage the 6 clamps.

    4. Using a clip remover, remove the 2 clips.

      A019MTH

      for Front Passenger Side:


      1. A019LHQ

        Disengage the 2 clamps and separate the occupant detection sensor connector.

    5. Disengage each hook and remove the front seat cushion cover with pad.

  11. REMOVE FRONT SEAT CUSHION COVER WITH PAD (w/ Seat Cushion Front Edge Adjustment Function)


    1. A019NWJ

      Disengage the 6 hooks.

    2. w/o Climate Control Seat System:


      1. A019LAD

        Disengage the 5 clamps.

    3. w/ Climate Control Seat System:


      1. A019NGQ

        Disconnect the 2 connectors.

      2. Disengage the 6 clamps.

    4. Using a clip remover, remove the 2 clips.

      A019MTH

    5. for Front Passenger Side:


      1. A019LHQ

        Disengage the 2 clamps and separate the occupant detection sensor connector.

    6. Disengage each hook.

    7. A019LSQ

      Disengage the 4 hooks.

    8. A019MEE

      Remove the 2 hog rings.

    9. Remove the front seat cushion cover with pad.

  12. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER (w/o Seat Cushion Front Edge Adjustment Function)


    1. A019L8I

      Remove the 2 hog rings.

    2. A019PB2

      Remove the 19 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad.

  13. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER (w/ Seat Cushion Front Edge Adjustment Function)


    1. A019L8I

      Remove the 2 hog rings.

    2. A019K8E

      Remove the 15 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad.

  14. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY (w/ Climate Control Seat System)


    1. A019PJQ

      Cut off the 30 tack pins that fasten the seat heater, and then remove the front seat cushion heater assembly from the separate type front seat cushion cover.

  15. REMOVE TELEVISION BASE (w/ Rear Seat Entertainment System)


    1. A019JM3

      Using a moulding remover, disengage the 3 claws and 3 guides, and remove the television base.

  16. REMOVE TELEVISION DISPLAY ASSEMBLY (w/ Rear Seat Entertainment System)


    1. A019LQH

      Disconnect the connector.

    2. Remove the 3 nuts and television display assembly.

  17. REMOVE NO. 2 TELEVISION BASE (w/ Rear Seat Entertainment System)


    1. A019M86

      Remove the 4 screws.

    2. A019KBU

      Using a clip remover, remove the 5 clips.

    3. Disengage the 2 guides and remove the No. 2 television base.

  18. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY


    1. A019LFS

      Remove the 2 screws.

    2. A019K72

      Disengage the 2 guides and remove the front seatback board sub-assembly as shown in the illustration.

  19. REMOVE FRONT SEATBACK BOARD COVER SUB-ASSEMBLY


    1. A019KI1

      Disengage the 2 guides and remove the front seatback board cover sub-assembly.

  20. REMOVE FRONT SEAT HEADREST SUPPORT


    1. A019OYX

      Disengage the 4 claws and remove the 2 headrest supports.

  21. REMOVE FRONT SEATBACK COVER WITH PAD


    1. A019NYZ

      Disengage the 2 hooks.

    2. A019N32

      Remove the 5 hog rings.

    3. A019M9S

      Disengage the 6 hooks as shown in the illustration.

    4. A019M32

      Remove the nut.

    5. Disengage the guide and remove the seatback cover bracket.

    6. Remove the front seatback cover with pad from the seatback frame.

  22. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    1. A019JLN

      Remove the 14 hog rings and the separate type front seatback cover from the separate type front seatback pad.

  23. REMOVE FRONT SEATBACK HEATER ASSEMBLY (w/ Climate Control Seat System)


    1. A019NN2

      Cut off the 12 tack pins that fasten the seatback heater, and then remove the front seatback heater assembly from the separate type front seat cushion cover.

  24. REMOVE SEATBACK CLIMATE CONTROL BLOWER (w/ Climate Control Seat System)


    1. for Driver Side:


      1. A019LKZ

        Disconnect the connector.

      2. Disengage the 3 clamps.

    2. for Front Passenger Side:


      1. A019LB5

        Disconnect the connector.

      2. Disengage the clamp.

    3. A019NR1

      Disengage the clamp.

    4. Using a T30 ''TORX'' socket, remove the 6 ''TORX'' bolts and remove the seatback climate control blower and the seatback climate control cover.

  25. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY


    1. A019MVQ

      Disengage the 4 guides and remove the seatback felt.

    2. A019O99

      Disengage the 4 clamps.

    3. A019PCA

      Disengage the 2 guides and remove the front seatback spring sub-assembly as shown in the illustration.

    4. A019NGU

      Disconnect the connector.

    5. Remove the 2 screws.

    6. Disengage the guide and remove the lumbar support adjuster assembly.

    7. A019N39

      Remove the bush.

  26. REMOVE ACTIVE HEADREST UPPER UNIT


    1. A019MFGE01

      Remove the nut <A> and disconnect the cable from the active headrest upper unit as shown in the illustration.

    2. Remove the 4 nuts <B> and the active headrest upper unit.

  27. REMOVE ACTIVE HEADREST LOWER UNIT


    1. A019OG1

      Remove the 2 nuts and the active headrest lower unit.

  28. REMOVE LOWER RECLINING ADJUSTER INSIDE COVER LH


    1. A019MC5E01
      Text in Illustration
      *1 Clamp
      *2 Guide

      Remove the 2 screws.

    2. Disengage the clamp and remove the side airbag wire harness.

    3. Disengage the guide and remove the lower reclining adjuster inside cover LH.

  29. REMOVE UPPER RECLINING ADJUSTER INSIDE COVER LH


    1. A019JWE

      Remove the screw.

    2. Disengage the guide and remove the upper reclining adjuster inside cover LH.

  30. REMOVE LOWER RECLINING ADJUSTER INSIDE COVER RH


    1. A019MFLE01
      Text in Illustration
      *1 Clamp
      *2 Guide

      Remove the 2 screws.

    2. Disengage the clamp and remove the side airbag wire harness.

    3. Disengage the guide and remove the lower reclining adjuster inside cover RH.

  31. REMOVE UPPER RECLINING ADJUSTER INSIDE COVER RH


    1. A019ON0

      Remove the screw.

    2. Disengage the guide and remove the upper reclining adjuster inside cover RH.

  32. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH


    1. A019NWIE01
      Text in Illustration
      *1 Hook
      *2 Guide

      Remove the screw.

    2. Disengage the hook as shown in the illustration.

    3. Disengage the guide and remove the front seat lower cushion shield LH.

  33. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH


    1. A019LA1E01
      Text in Illustration
      *1 Hook
      *2 Guide

      Remove the screw.

    2. Disengage the hook as shown in the illustration.

    3. Disengage the guide and remove the front seat lower cushion shield RH.

  34. REMOVE SEAT CUSHION CLIMATE CONTROL DUCT (w/ Climate Control Seat System)


    1. A019MJZE01

      Disengage the 2 clamps (A) in the direction indicated by the arrow.

    2. Disengage the 2 clamps (B) in the direction indicated by the arrow.

    3. Disengage the 2 claws, and remove the seat cushion climate control duct.

  35. REMOVE SEAT CUSHION CLIMATE CONTROL BLOWER (w/ Climate Control Seat System)


    1. A019KR6

      Disconnect the connector.

    2. Remove the screw.

    3. Pull up the bracket of the seat cushion climate control blower as shown in the illustration.

    4. Disengage the 2 hooks and remove the seat cushion climate control blower.

  36. REMOVE SEAT POSITION SENSOR


    1. A019O9P

      Disconnect the connector.

    2. Using a T30 "TORX" socket wrench, remove the "TORX" screw and seat position sensor with the seat slide position sensor protector.

    3. A019MVY

      Remove the seat position sensor from the seat slide position sensor protector as shown in the illustration.

  37. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Climate Control Seat System)


    1. A019KMM

      Disconnect the connector.

    2. Disengage the 2 guides and remove the seat heater control sub-assembly.

  38. REMOVE FRONT SEAT WIRE


    1. w/ Rear Seat Entertainment System:


      1. A019MBQ

        Disengage the 5 clamps.

    2. A019MET

      Disconnect the connector.

    3. Disengage the 3 clamps.

    4. A019NK0

      Disconnect the 3 connectors.

    5. Disengage the 8 clamps and remove the front seat wire from the front seat frame assembly with adjuster.

  39. REMOVE FRONT SEAT SIDE AIRBAG ASSEMBLY


    1. A019NHJ

      Disengage the 3 clamps to separate the wire harness.

    2. A019P8R

      Disengage the 2 clamps.

    3. A019MVN

      Remove the 2 nuts and front seat side airbag assembly.

      CAUTION:


      • The nuts must not be reused.

      • Make sure that the front seat frame assembly with adjuster is not deformed. If it is, replace it with a new one.