PRE-CRASH SAFETY SYSTEM, Diagnostic DTC:C1A02

DTC Code DTC Name
C1A02 Vehicle Information Not Obtained

DESCRIPTION

When a new driving support ECU is installed, it receives vehicle specification information (destination, steering wheel position, 2WD or AWD information, etc.) from the main body ECU, ECM and combination meter assembly and memorizes the information.

DTC C1A02 is stored when the driving support ECU receives the vehicle specification information from the main body ECU and combination meter but cannot record it.

DTC No. DTC Detection Condition Trouble Area
C1A02 Inconsistent vehicle specification information between the main body ECU and driving support ECU continues for 1 second or more while the vehicle is being driven at a speed of 50 km/h (31 mph) or more. Driving support ECU

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK DTC OUTPUT (CAN COMMUNICATION SYSTEM)


    1. Using the intelligent tester, enter the following menus: Body / Pre-Crash 2 / DTC.

    2. Clear the DTCs Click here.

    3. Drive the vehicle.

    4. Recheck for DTCs.

      OK
      CAN communication system DTC is not output.

    NG

    GO TO CAN COMMUNICATION SYSTEM Click here

    OK

    REPLACE DRIVING SUPPORT ECU Click here