PRE-CRASH SAFETY SYSTEM, Diagnostic DTC:B2060

DTC Code DTC Name
B2060 ABS Malfunction

DESCRIPTION

This DTC is stored when a malfunction in the vehicle stability control system is detected. This circuit consists of the skid control ECU and seat belt control ECU. Signals are sent from the skid control ECU using the CAN communication.

DTC No. DTC Detection Condition Trouble Area
B2060 Malfunction in brake control system (vehicle stability control system) is detected

  • CAN communication system

  • Vehicle stability control system

  • Seat belt control ECU

INSPECTION PROCEDURE

Tech Tips

This circuit uses CAN communication. Therefore, be sure to check that the CAN communication system is normal before performing inspection Click here.

PROCEDURE


  1. CHECK DTC OUTPUT (CAN COMMUNICATION SYSTEM)


    1. Clear the DTCs Click here.

    2. Recheck for DTCs.

      OK
      CAN communication system DTC is not output.

    NG

    GO TO CAN COMMUNICATION SYSTEM Click here

    OK

  2. CHECK DTC OUTPUT (VEHICLE STABILITY CONTROL SYSTEM)


    1. Check DTCs for the vehicle stability control system Click here.

      OK
      Vehicle stability control system DTC is not output.

    NG

    GO TO VEHICLE STABILITY CONTROL SYSTEM Click here

    OK

  3. CHECK DTC OUTPUT (PRE-CRASH SAFETY SYSTEM)


    1. Using the intelligent tester, enter the following menus: Body / Pre-Crash / DTC.

    2. Clear the DTCs Click here.

    3. Drive the vehicle.

    4. Recheck for DTCs.

      OK
      DTC B2060 is not output.

    NG

    REPLACE SEAT BELT CONTROL ECU Click here

    OK

    CHECK FOR INTERMITTENT PROBLEMS (SYMPTOM SIMULATION) Click here