AIRBAG CUT-OFF SWITCH INSTALLATION


  1. INSTALL AIRBAG CUT-OFF SWITCH CYLINDER SUB-ASSEMBLY


    1. A019O0N

      Engage the 2 claws to install the airbag cut-off switch cylinder sub-assembly.

    2. Connect the connector.

  2. INSTALL INSTRUMENT PANEL GARNISH RH


    1. A019MYY

      Engage the 6 clips to install the instrument panel garnish RH.

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. PERFORM DIAGNOSTIC SYSTEM CHECK


    1. Perform a diagnostic system check Click here.

  5. INSPECT SRS WARNING LIGHT


    1. Inspect the SRS warning light Click here.