OUTER MIRROR SWITCH REMOVAL


  1. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL


    1. A019MQ1

      Using a moulding remover, disengage the 2 clips and 5 claws as shown in the illustration.

    2. Disconnect the connector and remove the power window regulator master switch assembly with front door armrest base panel.

  2. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY


    1. A019OHH

      Remove the 3 screws.

    2. A019NPN

      Disengage the 4 claws and remove the multiplex network master switch assembly.