OUTER REAR VIEW MIRROR INSTALLATION

INSTALL OUTER REAR VIEW MIRROR ASSEMBLY
1. Engage the claw to install the outer rear view mirror assembly.
2. w/o Side Monitor System:
  1. Install the outer rear view mirror assembly with the 3 nuts.
    
    Torque:
    
    5.5 N*m { 56 kgf*cm, 49 in.*lbf }
  2. Engage the clamp as shown in the illustration.
3. w/ Side Monitor System:
  1. Install the outer rear view mirror assembly with the 3 nuts.
    
    Torque:
    
    5.5 N*m { 56 kgf*cm, 49 in.*lbf }
  2. Engage the clamp as shown in the illustration.
  3. Connect the connector.
INSTALL OUTER MIRROR INSTALL HOLE COVER
1. Engage the 2 claws and 2 guides to install the outer mirror install hole cover as shown in the illustration.
INSTALL OUTER MIRROR PROTECTOR
1. Install a new outer mirror protector.
INSTALL FRONT DOOR SERVICE HOLE COVER
1. Apply butyl tape to the front door panel.
2. Text in Illustration
  
  *1 Reference Point
  
  Pass the front door lock remote control cable assembly and front door inside locking cable assembly through a new front door service hole cover.
3. Attach the front door service hole cover according to the reference points on the front door panel.
  
  Note
  
  Securely install the front door service hole cover preventing wrinkles and air bubbles.
4. Connect the connector.
INSTALL NO. 1 FRONT DOOR TRIM BRACKET
1. Install the 2 bolts and No. 1 front door trim bracket.
INSTALL OUTER MIRROR CONTROL ECU ASSEMBLY
1. Install the outer mirror control ECU assembly with the 2 screws.
2. Connect each connector.
INSTALL NO. 3 FRONT SPEAKER ASSEMBLY
1. Engage the clip and temporarily install the front No. 3 speaker assembly.
2. Install the front No. 3 speaker assembly with the 2 screws.
3. Connect the connector.
INSTALL DOOR FRAME GARNISH
1. Install the door frame garnish with the 2 clips.
INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP
1. Engage the 4 claws and install the front door inner glass weatherstrip as shown in the illustration.
INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY
1. Install a new front door trim board retainer (green).
2. Connect the front door lock remote control cable assembly and front door inside locking cable assembly.
3. Connect each connector.
4. Engage the front door trim board sub-assembly with the 4 claws of the front door inner glass weatherstrip as shown in the illustration.
5. Text in Illustration
  
  *1 Front Door Trim Board Retainer
  
  Engage the 10 clips, front door trim board retainer and install the front door trim board sub-assembly.
6. Install the 3 screws.
  
  Torque:
  
  (A)
  
  3.5 N*m { 36 kgf*cm, 31 in.*lbf }
INSTALL NO. 1 FRONT DOOR STIFFENER CUSHION
1. Install the No. 1 front door stiffener cushion with the screw.
INSTALL COURTESY LIGHT ASSEMBLY
1. Connect the connector.
2. Text in Illustration
  
  *A for LH Side
  
  *B for RH Side
  
  Engage the claw to install the courtesy light assembly.
INSTALL DOOR ARMREST COVER
1. Install the door armrest cover.
INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)
1. Connect the connector.
2. Engage the 2 clips and 5 claws, and install the power window regulator master switch assembly with front door armrest base panel.
INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)
1. Connect the connector.
2. Engage the 2 clips and 5 claws, and install the power window regulator switch assembly with front door armrest base panel.
INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG
1. Engage the 3 claws and install the front door inside handle bezel plug.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Note

When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
ADJUST SIDE TELEVISION CAMERA OPTICAL AXIS (CAMERA POSITION SETTING) (w/ Parking Assist Monitor System)

Click here.

Text in Illustration
*A	for LH Side
*B	for RH Side