КАБЕЛЬ ГЕНЕРАТОРА СНЯТИЕ

CAUTION:

The engine assembly with hybrid vehicle transmission assembly is very heavy. Be sure to follow the procedure described in the repair manual, or the engine lifter may suddenly drop


  1. PRECAUTION

    Click here

  2. REMOVE ENGINE WITH TRANSMISSION

    Click here

  3. REMOVE GENERATOR CABLE

    CAUTION:

    Wear insulated gloves.

    Note


    • Cover the hole where the generator cable was connected with tape or equivalent (nonresidue type) to prevent entry of foreign matter.

    • Insulate the removed terminals with insulating tape.

    • When removing the generator cable, make sure not to bend the generator cable base on the hybrid vehicle transmission assembly side.


    1. Release the motor cable side lock of the wiring harness clamp to disconnect the motor cable from the wiring harness clamp as shown in the illustration.

      A01FUC8E01
      Text in Illustration
      *A for LHD *B for RHD
      *1 Wiring Harness Clamp *2 Motor Cable
      *a Matchmark - -

      Tech Tips

      Place a matchmark on the motor cable before disconnecting the motor cable from the wiring harness clamp.

    2. Disconnect the clamp from the generator cable.

      A01FRJSE01
      Text in Illustration
      *A for LHD *B for RHD

    3. Disconnect the 3 clamps from the engine assembly and hybrid vehicle transmission assembly.

      A01FRO4E01
      Text in Illustration
      *A for LHD *B for RHD
    4. A01FRJU

      Using an insulated tool, remove the 2 bolts and connector cover from the generator cable and hybrid vehicle transmission assembly.

    5. A01FUDH

      Disengage the 2 claws to remove the terminal cap from the hybrid vehicle transmission assembly.

    6. A01FT53

      Using an insulated tool, remove the 5 bolts and generator cable from the hybrid vehicle transmission assembly.