ВЫПУСКНОЙ КОЛЛЕКТОР СНЯТИЕ


  1. REMOVE ENGINE ASSEMBLY WITH TRANSMISSION

    Click here

  2. REMOVE AIR FUEL RATIO SENSOR


    1. A01FT40E01
      Text in Illustration
      *1 Wire Harness Clamp Bracket

      Disconnect the air fuel ratio sensor connector.

    2. Disconnect the clamp and remove the wire harness clamp bracket from the air fuel ratio sensor.

    3. A01FQYCE01

      Using SST, remove the air fuel ratio sensor from the exhaust manifold converter sub-assembly.

      SST
      09224-00010

  3. REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR


    1. A01FQYH

      Remove the 4 bolts and No. 1 exhaust manifold heat insulator from the exhaust manifold converter sub-assembly.

  4. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY


    1. w/o EGR System:


      1. A01FQHR

        Remove the 5 nuts and exhaust manifold converter sub-assembly.

      2. Remove the gasket from the cylinder head sub-assembly.

    2. w/ EGR System:


      1. A01FUML

        Remove the 2 bolts, 5 nuts and exhaust manifold converter sub-assembly.

        Text in Illustration
        A01FTNO Nut
        A01FRJI Bolt

      2. Remove the gasket and EGR cooler gasket from the cylinder head sub-assembly and EGR cooler assembly.

  5. REMOVE NO. 1 MANIFOLD CONVERTER INSULATOR


    1. Remove the 5 bolts, 2 nuts and No. 1 manifold converter insulator from the exhaust manifold converter sub-assembly.

      A01FRBQE01
      Text in Illustration
      *A w/o EGR System *B w/ EGR System

  6. REMOVE NO. 2 MANIFOLD CONVERTER INSULATOR


    1. Remove the 2 bolts and No. 2 manifold converter insulator from the exhaust manifold converter sub-assembly.

      A01FRAJE01
      Text in Illustration
      *A w/o EGR System *B w/ EGR System