ТЕРМОСТАТ ПРОВЕРКА


  1. INSPECT WATER INLET WITH THERMOSTAT SUB-ASSEMBLY

    Tech Tips

    The valve opening temperature is inscribed on the water inlet with thermostat sub-assembly.

    A01FU2V

    1. Immerse the water inlet with thermostat sub-assembly in water and then gradually heat the water.

    2. Check the valve opening temperature of the water inlet with thermostat sub-assembly.

      Standard valve opening temperature
      80 to 84°C (176 to 183°F)

      If the valve opening temperature is not as specified, replace the water inlet with thermostat sub-assembly.

    3. A01FU8JE01
      Text in Illustration
      *a Valve Lift

      Check the valve lift.

      Standard valve lift
      8.0 mm (0.315 in.) or more at 95°C (203°F)

      If the valve lift is not as specified, replace the water inlet with thermostat sub-assembly.

    4. Check that the valve is fully closed when the water inlet with thermostat sub-assembly is at a low temperature (below 77°C (171°F)).

      If not fully closed, replace the water inlet with thermostat sub-assembly.