REMOVE FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE
REMOVE FUEL TANK VENT TUBE ASSEMBLY
DRAIN FUEL
REMOVE PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY
DISCONNECT FUEL TUBE
Disconnect the 2 fuel tank main tube sub-assemblies from the fuel main tube Click here.
Disconnect the No. 1 fuel evaporation tube from fuel tank to canister tube Click here.
DISCONNECT FUEL TANK TO FILLER PIPE HOSE
Loosen the hose clamp bolt and disconnect the fuel tank to filler pipe hose.
DISCONNECT FUEL TANK BREATHER TUBE
Loosen the hose clamp bolt and disconnect the fuel tank breather tube from the fuel tank filler pipe sub-assembly.
Slide the 2 hose clamps and disconnect the hose from the fuel tank breather tube.
DISCONNECT CHARCOAL CANISTER OUTLET HOSE
Disconnect the charcoal canister outlet hose from the fuel tank filler pipe sub-assembly.
REMOVE REAR SUSPENSION MEMBER BRACE
REMOVE FUEL TANK ASSEMBLY
Using an engine lifter and attachments, support the fuel tank assembly.
|
Bolt |
|
Nut |
Remove the 2 nuts, 4 bolts and 2 No. 1 fuel tank bands.
Using an engine lifter, lower the fuel tank assembly and remove it.
REMOVE NO. 1 FUEL EVAPORATION TUBE SUB-ASSEMBLY
Remove the No. 1 fuel evaporation tube sub-assembly from the fuel tank assembly.
REMOVE CHARCOAL CANISTER OUTLET HOSE
Detach the clamp to remove the charcoal canister outlet hose from the fuel tank assembly.
Remove the No. 4 fuel tube clamp from the fuel tank assembly.
REMOVE FUEL TANK MAIN TUBE SUB-ASSEMBLY
Detach the clamp to remove the fuel tank main tube sub-assembly from the fuel tank assembly.
Remove the No. 5 fuel tube clamp from the fuel tank assembly.
REMOVE FUEL TANK CUSHION
Remove the 5 No. 6 fuel tank cushions from the fuel tank assembly.
| *1 | Fuel Tank Bracket |
| *2 | Fuel Tank Cushion |
| *3 | Fuel Tank Cushion Set |
| *a | RH side |
| *b | LH side |
Remove the fuel tank bracket, 2 fuel tank cushions and fuel tank cushion set from the fuel tank assembly.
REMOVE NO. 1 FUEL TANK PROTECTOR SUB-ASSEMBLY
| *1 | No. 1 Fuel Tank Protector Sub-assembly |
| *2 | No. 2 Fuel Tank Protector |
| *3 | No. 3 Fuel Tank Protector |
Remove the No. 1 fuel tank protector sub-assembly from the fuel tank assembly.
Remove the No. 2 fuel tank protector and No. 3 fuel tank protector from the fuel tank assembly.