ТОПЛИВНЫЙ НАСОС РАЗБОРКА


  1. REMOVE FUEL SENDER GAUGE ASSEMBLY


    1. A01FRY8E01

      Disconnect the fuel sender gauge connector.

    2. Push the claw labeled A of the fuel sender gauge assembly, and then pull up the fuel sender gauge assembly to remove it.

      Note


      • Do not touch the resistance plate or contacts of the fuel sender gauge assembly.

      • Do not bend the arm of the fuel sender gauge assembly.

  2. REMOVE FUEL SUCTION PLATE SUB-ASSEMBLY

    A01FUKC

    Note


    • Do not disconnect the hose indicated in the illustration.

    • When replacing the fuel filter assembly, replace it together with the fuel suction plate sub-assembly.


    1. A01FR56

      Disconnect the fuel pump harness from the clamp.

    2. Disconnect the fuel pump harness connector.

    3. A01FV9GE01
      Text in Illustration
      *1 E-Ring

      Using needle nose pliers, remove the E-ring.

    4. Remove the fuel suction plate sub-assembly and spring from the No. 1 fuel sub-tank.

    5. A01FSBK

      Using a screwdriver with the tip taped, detach the 2 claws and remove the fuel filter assembly from the No. 1 fuel sub-tank.

      Note

      Do not damage the No. 1 fuel sub-tank or fuel filter assembly.

  3. REMOVE JET PUMP


    1. A01FPYF

      Detach the claw and remove the jet pump nozzle.

    2. A01FT16E02
      Text in Illustration
      *a Protective Tape

      Using a clip remover with the tip taped, remove the jet pump from the No. 1 fuel sub-tank.

    3. A01FV2GE01
      Text in Illustration
      *1 Jet Pump
      *2 O-Ring

      Remove the O-ring from the jet pump.

  4. REMOVE FUEL PUMP HARNESS


    1. A01FR82

      Disconnect the fuel pump connector from the fuel pump assembly.

  5. REMOVE NO. 1 FUEL SUCTION SUPPORT


    1. A01FVL3

      Detach the 2 claws and remove the No. 1 fuel suction support.

  6. REMOVE FUEL WITH FILTER PUMP ASSEMBLY


    1. A01FVUF

      Using a screwdriver with the tip taped, detach the 5 claws and remove the fuel filter assembly from the fuel with filter pump assembly.

    2. A01FRRXE01
      Text in Illustration
      *1 O-Ring
      *2 Fuel Pump Spacer

      Remove the O-ring and fuel pump spacer from the fuel with filter pump assembly.