РЕГУЛЯТОР ДАВЛЕНИЯ В ТОПЛИВНОЙ СИСТЕМЕ УСТАНОВКА


  1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY


    1. Apply a light coat of gasoline to 2 new O-rings and then install them to the fuel pressure regulator assembly.

    2. Install the fuel pressure regulator assembly to the fuel filter.

      Note

      Make sure that the O-ring is not cut or pinched during installation.

  2. INSTALL FUEL PUMP WITH FILTER ASSEMBLY

    Tech Tips

    Perform "Inspection After Repairs" after replacing the fuel pump.



    1. A01FT6BE01
      Text in Illustration
      *1 Fuel Pump Spacer
      *2 O-Ring

      Install the fuel pump spacer to the fuel with filter pump assembly.

    2. Apply a light coat of gasoline to a new O-ring, and then install the O-ring to the fuel with filter pump assembly.

    3. Attach the 5 claws of the fuel filter assembly to install the fuel with filter pump assembly.

      Note


      • When installing the O-ring, make sure that it does not become pinched or cut.

      • Securely attach the claws.

  3. INSTALL NO. 1 FUEL SUCTION SUPPORT


    1. Attach the 2 claws to install the No. 1 fuel suction support to the fuel with filter pump assembly.

  4. INSTALL FUEL PUMP HARNESS


    1. Connect the fuel pump connector to the fuel with filter pump assembly.

  5. INSTALL JET PUMP


    1. Apply a light coat of gasoline to a new O-ring and install the O-ring to the jet pump.

    2. A01FVV5

      Attach the claw to install the jet pump to the No. 1 fuel sub-tank as shown in the illustration.

      Note

      When installing the O-ring, make sure that it does not become pinched or cut.

    3. Attach the claw to install the jet pump to the No. 1 fuel sub-tank.

      Note

      Securely attach the claws.

  6. INSTALL FUEL SENDER GAUGE ASSEMBLY


    1. A01FTRYE01

      Slide the fuel sender gauge assembly downwards and attach the claw labeled A to install the fuel sender gauge assembly.

    2. Connect the fuel sender gauge connector.

      Note

      Do not touch the resistance plate or contacts of the fuel sender gauge assembly.

  7. INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY

    Click here