ТОПЛИВНАЯ ФОРСУНКА (для непосредственного впрыска) ПРОВЕРКА


  1. INSPECT FUEL INJECTOR SET

    Note

    This inspection aims at inspecting the fuel injector set for an open or short, because the fuel injector sets of this vehicle are a high-pressure type and cannot be inspected for fuel injection volume.


    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 1.74 to 2.04 Ω

      If the result is not as specified, replace the fuel injector set.