ДАТЧИК СОСТАВА ТОПЛИВОВОЗДУШНОЙ СМЕСИ СНЯТИЕ


  1. REMOVE AIR FUEL RATIO SENSOR


    1. A01FT40E01
      Text in Illustration
      *1 Wire Harness Clamp Bracket

      Disconnect the air fuel ratio sensor connector.

    2. Disconnect the clamp and remove the wire harness clamp bracket from the air fuel ratio sensor.

    3. A01FQYCE01

      Using SST, remove the air fuel ratio sensor from the exhaust manifold converter sub-assembly.

      SST
      09224-00010