ДАТЧИК ДЕТОНАЦИИ УСТАНОВКА

INSTALL KNOCK CONTROL SENSOR

1. 

   Text in Illustration

   *a	Top
   *b	Engine Front

   Install the knock control sensor to the cylinder block sub-assembly with the bolt as shown in the illustration.

   Torque:

   20 N*m  { 204 kgf*cm, 15 ft.*lbf }

   Note

   
   

   • Make sure that the knock control sensor is in the correct position.

   • If a knock control sensor has been struck or dropped, replace it.

   Tech Tips

   Perform "Inspection After Repair" after replacing the knock control sensor.

   
   

   • w/ EGR System: Click here

   • w/o EGR System: Click here

2. Connect the knock control sensor connector.

INSTALL INTAKE MANIFOLD

Click here