ECM УСТАНОВКА


  1. INSTALL ENGINE ROOM ECU BOX


    1. Install the engine room ECU box to the ECM.

  2. INSTALL ENGINE ROOM ECU COVER


    1. Attach the 3 claws to install the engine room ECU cover to the engine room ECU box.

  3. INSTALL NO. 2 ECM BRACKET


    1. Install the No. 2 ECM bracket to the engine room ECU cover with the 2 bolts.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  4. INSTALL ECM BRACKET


    1. Install the ECM bracket to the engine room ECU box with the 2 bolts.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  5. INSTALL ECM


    1. Install the ECM with the 2 nuts.

      Torque:
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

      Note

      If the ECM has been struck or dropped, replace it.

    2. Connect the 2 wire harness clamps.

    3. A01FSUS

      Connect the 2 ECM connectors and lower the 2 levers.

      Note


      • When connecting the ECM connectors, make sure that dirt, water or other foreign matter does not get caught between the ECM connectors and other parts.

      • Make sure that the 2 levers are securely locked.

    4. Connect the wire harness clamp.

  6. INSTALL COOL AIR INTAKE DUCT SEAL


    1. Установите сальник впускного воздухопровода холодного воздуха и закрепите его 7 фиксаторами.

  7. INSTALL ENGINE ROOM SIDE COVER


    1. Установите боковую крышку моторного отсека и закрепите ее 4 фиксаторами.

  8. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  9. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH


    1. Установите левую облицовочную накладку багажного отделения.

  10. INSTALL LUGGAGE COMPARTMENT FLOOR MAT


    1. Установите напольный коврик багажного отделения.

  11. PERFORM INITIALIZATION