ВОЗДУХОПРОВОД СИСТЕМЫ ОХЛАЖДЕНИЯ АККУМУЛЯТОРНОЙ БАТАРЕИ (для моделей с фильтром) ПРОВЕРКА

INSPECT NO. 6 HYBRID BATTERY INTAKE DUCT

1. Inspect the No. 6 hybrid battery intake duct.

   
   

   1. Visually inspect the No. 6 hybrid battery intake duct.

      Standard
      No deformation or cracks.

      Note

      If the result is not as specified, replace the No. 6 hybrid battery intake duct.

   2. Inspect the filter.

      Standard
      No clogs or damage.

      Note

      
      

      • If the filter is damaged, replace the No. 6 hybrid battery intake duct.

      • If the filter is damaged, check that there are no foreign objects in the No. 3 hybrid battery intake duct and battery cooling blower assembly, and clean or replace parts if necessary.

2. 

   Text in Illustration

   *1

   Filter

   Clean the filter.

   Note

   
   

   • Make sure to only use compressed air because an abnormal odor may occur if liquid enters the silencer inside the No. 6 hybrid battery intake duct.

   • Do not blow compressed air at a distance closer than 30 cm from the filter as it may damage the filter.

   • Do not use wire brushes, etc. when cleaning as they may damage the filter.

   
   

   1. Blow compressed air on the filter as shown in the illustration.

INSPECT NO. 1 HYBRID BATTERY INTAKE DUCT

1. Inspect the No. 1 hybrid battery intake duct.

   
   

   1. Visually inspect the No. 1 hybrid battery intake duct.

      Standard
      No deformation or cracks.

      Note

      If the result is not as specified, replace the No. 1 hybrid battery intake duct.

   2. Inspect the filter.

      Standard
      No clogs or damage.

      Note

      
      

      • If the filter is damaged, replace the No. 1 hybrid battery intake duct.

      • If the filter is damaged, check that there are no foreign objects in the No. 3 hybrid battery intake duct and battery cooling blower assembly, and clean or replace parts if necessary.

2. 

   Text in Illustration

   *1

   Filter

   Clean the filter.

   Note

   
   

   • Make sure to only use compressed air because an abnormal odor may occur if liquid enters the silencer inside the No. 1 hybrid battery intake duct.

   • Do not blow compressed air at a distance closer than 30 cm from the filter as it may damage the filter.

   • Do not use wire brushes, etc. when cleaning as they may damage the filter.

   
   

   1. Blow compressed air on the filter as shown in the illustration.