ДАТЧИК ПОЛОЖЕНИЯ ПЕДАЛИ АКСЕЛЕРАТОРА СНЯТИЕ


  1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    A01FVMJ

    1. Выверните 3 винта <A>.

    2. Освободите 2 захвата.

    3. Отсоедините разъемы, освободите зажим и снимите нижнюю крышку панели приборов № 1.

  2. REMOVE ACCELERATOR PEDAL


    1. A01FQ4X

      Detach the 2 claws and remove the accelerator pedal pad.

    2. A01FQ3A

      Remove the 2 bolts and accelerator pedal.

  3. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

    Note


    • Avoid excessive force to the accelerator pedal sensor assembly.

    • Do not disassemble the accelerator pedal sensor assembly.

    • This accelerator pedal does not require lubrication.

      Do not apply oil or lubricant to the accelerator pedal sensor assembly.

      If applied, the accelerator pedal sensor assembly must be replaced.


    1. A01FV30E01
      Text in Illustration
      *A for LHD
      *B for RHD

      Disconnect the accelerator pedal sensor connector.

    2. Remove the 2 nuts and accelerator pedal sensor assembly.